Note: this page is old and no longer applicable. It describes how to install SEBA 1.0.0, over CORD Platform 6.1.0, for ARM64 servers.

Install CORD Platform & SEBA

First, clone the AArch64-specific helm charts for cord-platform, seba, att-workflow and bbsim using:

$ git clone http://github.com/iecedge/seba_charts cord

Then proceed to install components as a whole as described in the SEBA Installation Guide, skipping the `helm repo add` and `helm update` commands.

Test/operate a SEBA installation 

Content WIP