...
| Blueprint | Servers | Dataplane | Validated HW details | Validated by |
|---|---|---|---|---|
| Rover | Dell 740XD | ATT Rover Validation HW, Networking and IP plan | AT&T | |
| Ericsson | ||||
| Rover | HP 380 Gen10<INSERT LINK TO ATT HP SERVER SPEC> | ATT Rover Validation HW, Networking and IP plan | AT&T |
Preflight Requirements
...
The Target Rover Server has two physical and multiple VLAN interfaces. The RC uses different interfaces on the Target Rover Server during the different stages of its creation of a Rover pod. A very detailed description of the entire networking setup can be found in the Network Architecture section of this release documentation. In addition the networking configuration with example values similar to that used during validation testing is contained in the Validation Labs section of this release documentation Ericsson Rover Validation HW, Networking and IP plan.
...
The automated deployment process configures the new Rover Server based on a set of user defined values specific to each Rover pod. These values must be defined and stored in a yaml site and pod specific input configuration file before the Rover pod deployment process can be started.
...
If an action appears to fail clock click 'Refresh'.
Select a Region and select 'Rover' for the blueprint :
...
Click 'Upload' to allow you to select the Rover site and pod specific input yaml file:
Choose the input file that you have created for the new Rover pod you want to deploy then click 'Submit'.
For Rover pod deployment there is no 'Build' step.
Make sure the pod you intend to deploy is still selected.
To initiate the automated deployment click 'Deploy'. You should see the status change to 'In Progress'.
The deployment may take a couple of hours to complete.
It is also possible to follow the progress deployment in a number of ways including from the logs on the RC, monitoring the DHCP server on the RC and the virtual console of the iDRAC/iLO on the Rover server being deployed. Details are shown in the Deployment Walk-Throughs section of the release documentation.
One of the simplest and easiest approaches is to ssh into the RC's 'host' address and issue the following command:
| Code Block | ||
|---|---|---|
| ||
root@regional_controller# tail -f /var/log/akraino/scriptexecutor.log 2019-05-29 18:35:50.902 DEBUG 18222 --- [SimpleAsyncTaskExecutor-34] .a.b.s.i.DeployResponseSenderServiceImpl : BuildResponse [siteName=MTN2, buildStatus=null, createTarStatus=null, genesisNodeStatus=null, deployToolsStatus=null, deployStatus=exception: problem while executing the script. exit code :1, onapStatus=null, vCDNStatus=null, tempestStatus=null] 2019-05-29 18:35:50.910 DEBUG 18222 --- [SimpleAsyncTaskExecutor-34] .a.b.s.i.DeployResponseSenderServiceImpl : Build response HttpResponseStatus :200 2019-05-29 18:38:21.965 DEBUG 18222 --- [http-nio-8073-exec-9] c.a.b.controller.CamundaRestController : Request received for deploy Deploy [sitename=MTN2, blueprint=Rover, filepath=/opt/akraino/redfish/install_server_os.sh , fileparams=--rc /opt/akraino/server-build/MTN2 --skip-confirm, winscpfilepa, port=22, username=root, password=akraino,d, destdir=/opt, remotefilename=akraino_airship_deploy.sh, remotefileparams=null, deploymentverifier=null, deploymentverifierfileparams=null, noofiterations=0, waittime=0, postverificationscript=null, postverificationScriptparams=null] 2019-05-29 18:38:21.968 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.d.DeployScriptExecutorTaskDelegate : task execution started :/opt/akraino/redfish/install_server_os.sh --rc /opt/akraino/server-build/MTN2 --skip-confirm 2019-05-29 18:38:21.968 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : Executing the script............. 2019-05-29 18:38:21.972 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : logging to /var/log/akraino/install_server_os_2019-05-29T18-38-21+0000 2019-05-29 18:38:21.973 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : Beginning /opt/akraino/redfish/install_server_os.sh as user [root] in pwd [/opt/akraino/workflow] with home [/root] 2019-05-29 18:38:21.978 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : Checking for known required packages 2019-05-29 18:38:22.266 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : python/xenial-updates,now 2.7.12-1~16.04 amd64 [installed] 2019-05-29 18:38:22.540 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : xorriso/xenial,now 1.4.2-4ubuntu1 amd64 [installed] 2019-05-29 18:38:22.816 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : sshpass/xenial,now 1.05-1 amd64 [installed] 2019-05-29 18:38:23.094 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : python-requests/xenial-updates,xenial-updates,now 2.9.1-3ubuntu0.1 all [installed] 2019-05-29 18:38:23.332 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : python-pip/xenial-updates,xenial-updates,now 8.1.1-2ubuntu0.4 all [installed] 2019-05-29 18:38:23.579 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : python-yaml/xenial,now 3.11-3build1 amd64 [installed] 2019-05-29 18:38:23.817 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : python-jinja2/xenial,xenial,now 2.8-1 all [installed] 2019-05-29 18:38:24.080 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : make/xenial,now 4.1-6 amd64 [installed,automatic] 2019-05-29 18:38:24.318 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : gcc/xenial,now 4:5.3.1-1ubuntu1 amd64 [installed] 2019-05-29 18:38:24.556 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : coreutils/xenial-updates,now 8.25-2ubuntu3~16.04 amd64 [installed] 2019-05-29 18:38:24.556 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : Tools are ready in [/opt/akraino] 2019-05-29 18:38:24.560 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : Using Build Web ip address [10.51.34.231] 2019-05-29 18:38:34.570 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : WARNING: Preparing to build server [aknode29] using oob ip [10.51.35.146]. Beginning in 10 seconds .......... 2019-05-29 18:38:34.572 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : Beginning bare metal install of os at Wed May 29 18:38:34 UTC 2019 2019-05-29 18:38:34.606 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : Found build web ip address [10.51.34.231] on this server! 2019-05-29 18:38:34.608 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : bond0.408 Link encap:Ethernet HWaddr 3c:fd:fe:d2:5b:21 2019-05-29 18:38:34.608 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : inet addr:10.51.34.231 Bcast:10.51.34.255 Mask:255.255.255.224 2019-05-29 18:38:34.608 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : Checking access to server oob ip [10.51.35.146] 2019-05-29 18:38:36.647 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : 64 bytes from 10.51.35.146: icmp_seq=1 ttl=63 time=0.539 ms 2019-05-29 18:38:36.647 DEBUG 18222 --- [SimpleAsyncTaskExecutor-35] c.a.b.s.impl.ScriptExecutionServiceImpl : 64 bytes from 10.51.35.146: icmp_seq=2 ttl=63 time=0.504 ms |
If the pod deploys successfully you will see the UI change to show a 'Success' message.
And the scriptexecutor.log file will show the process completed successfully.
Rover Pod Site Specific Configuration Input Files
This section contains links to the input files used to build the Rover pods in ATT's and Ericsson's validation labs for the R1 release. Being pods and site specific the enumerated values will differ. Full details of the relevant validation lab setup that should be referenced when looking at these files is contained in the Validation Labs section of this documentation.
...