Pre-Installation Requirements

In order to use the

Pre-Installation Requirements

In order to use the playbooks several preconditions must be fulfilled:

...

In order to set some custom static hostname, a command can be used:

hostnamectl set-hostname <host_name>

...

In order to execute playbooks, inventory.ini must be configure configured to include specific hosts to run the playbooks on.

...

# ssh-keygen

Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa):  <ENTER>
Enter passphrase (empty for no passphrase):  <ENTER>
Enter same passphrase again:  <ENTER>
Your identification has been saved in /root/.ssh/id_rsa.
Your public key has been saved in /root/.ssh/id_rsa.pub.
The key fingerprint is:
SHA256:vlcKVU8Tj8nxdDXTW6AHdAgqaM/35s2doon76uYpNA0 root@host
The key's randomart image is:
+---[RSA 2048]----+
|          .oo.==*|
|     .   .  o=oB*|
|    o . .  ..o=.=|
|   . oE.  .  ... |
|      ooS.       |
|      ooo.  .    |
|     . ...oo     |
|      . .*o+.. . |
|       =O==.o.o  |
+----[SHA256]-----+

Then, the generated key must be copied to every host from the inventory. It is done by running ssh-copy-id, e.g.:

# ssh-copy-id root@host

/usr/bin/ssh-copy-id: INFO: Source of key(s) to be installed: "/root/.ssh/id_rsa.pub"
The authenticity of host '<IP> (<IP>)' can't be established.
ECDSA key fingerprint is SHA256:c7EroVdl44CaLH/IOCBu0K0/MHl8ME5ROMV0AGzs8mY.
ECDSA key fingerprint is MD5:38:c8:03:d6:5a:8e:f7:7d:bd:37:a0:f1:08:15:28:bb.
Are you sure you want to continue connecting (yes/no)? yes
/usr/bin/ssh-copy-id: INFO: attempting to log in with the new key(s), to filter out any that are already installed
/usr/bin/ssh-copy-id: INFO: 1 key(s) remain to be installed -- if you are prompted now it is to install the new keys
root@host's password:

Number of key(s) added: 1

Now try logging into the machine, with:   "ssh 'root@host'"
and check to make sure that only the key(s) you wanted were added.

To make sure key is copied successfully, try to SSH to the host: ssh 'root@host'. It should not ask for the password.

Setting proxy

If proxy is required in order to connect to the Internet it can be configured in group_vars/all.yml file. To enable proxy provide values for proxy_ variables and set proxy_os_enable to true. Also append your network CIDR (e.g. 192.168.0.1/24) to the proxy_os_noproxy.

Sample configuration:

proxy_yum_url: "http://proxy.example.com:3128/"

proxy_os_enable: true
proxy_os_remove_old: true
proxy_os_http: "http://proxy.example.com:3128"
proxy_os_https: "http://proxy.example.com:3128"
proxy_os_ftp: "http://proxy.example.com:3128"
proxy_os_noproxy: "localhost,127.0.0.1,10.244.0.0/24,10.96.0.0/12,192.168.0.1/24"

NOTE: Ensure the no_proxy environment variable in your profile is set

export no_proxy="localhost,127.0.0.1,10.244.0.0/24,10.96.0.0/12,192.168.0.1/24"

Setting Git

GitHub Token

NOTE: Only required when cloning private repositories. Not needed when using github.com/open-ness repositories.

In order to clone private repositories GitHub token must be provided.

To generate GitHub token refer to GitHub help - Creating a personal access token for the command line.

To provide the token, edit value of git_repo_token variable in in group_vars/all.yml.

Customize tag/commit/sha to checkout

Specific tag, commit or sha can be checked out by setting git_repo_branch variable in group_vars/edgenode_group.yml for Edge Nodes and groups_vars/controller_group.yml for Kubernetes master / Edge Controller

Running playbooks

For convenience, playbooks can be executed by running helper deployment scripts.

NOTE: All nodes provided in the inventory may reboot during the installation.

Convention for the scripts is: action_mode.sh [group]. Following scripts are available for Network Edge mode:

• deploy_ne.sh [ controller | nodes ]
• cleanup_ne.sh [ controller | nodes ]

To run deploy of only Edge Nodes or Edge Controller use deploy_ne.sh nodes and deploy_ne.sh controller respectively.

Developer  Guide and Troubleshooting

Developer Guide

Start by following the page Setting Up Your Development Environment, this covers items such as signing up for a linux foundation account, configuring git, installing gerrit and IDE recommendations.

Clone 5G-MEC-CLOUD-GAMING Code

Visit https://gerrit.akraino.org/r/admin/repos/5g-mec-cloud-gaming to obtain the git clone commands. 

Download Submodule

• git submodule update --init --recursive

Setup Environment

Enter work directory:

• cd ./5g-mec-cloud-gaming

Execute the versify.sh script to setup the work environment:

       versify.sh script first installs Golang and ginkgo，then installs docker and docker-compose.

Golang：

wget https://dl.google.com/go/ go1.13.4.linux-amd64.tar.gz

export GOPATH=$HOME/go

export PATH=$PATH:$GOPATH/bin

Ginkgo：

go get github.com/onsi/ginkgo/ginkgo

go get github.com/onsi/gomega/

Docker：

yum install -y yum-utils  device-mapper-persistent-data  lvm2

yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo

yum install -y  docker-ce docker-ce-cli containerd.io

Docker-compose：

curl -L "https://github.com/docker/compose/releases/download/1.24.1/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose

chmod +x /usr/local/bin/docker-compose

ln -s /usr/local/bin/docker-compose /usr/bin/docker-compose

Running Playbooks

For convenience, playbooks can be executed by running helper deployment scripts.

NOTE: All nodes provided in the inventory may reboot during the installation.

Convention for the scripts is: action_mode.sh [group]. Following scripts are available for Network Edge mode:

• deploy_ne.sh [ controller | nodes ]

To run deploy of only Edge Nodes or Edge Controller use deploy_ne.sh nodes and deploy_ne.sh controller respectively. 

NOTE: Playbooks for Edge Controller/Kubernetes master must be executed before playbooks for Edge Nodes.

NOTE: Edge Nodes and Edge Controller must be set up on different machines.

Uninstall Guide

Role of cleanup playbook is to revert changes made by deploy playbooks. Convention for the scripts is: action_mode.sh [group].  Following script is available for cleanup:

• cleanup_ne.sh [ controller | nodes]

Teardown is made by going step by step in reverse order and undoing the steps. For example, playbooks for Edge Controller/Kubernetes master must be executed before playbooks for Edge Nodes. During the unistall operation, the cleanup script of Edge Nodes should be executed first, and then run the cleanup script of Edge Controller / Kubernetes master.

Note that there might be some leftovers created by installed software.

Troubleshooting

Proxy issues

...

added.

To make sure key is copied successfully, try to SSH to the host: ssh 'root@host'. It should not ask for the password.

Setting proxy

If proxy is required in order to connect to the Internet it can be configured in group_vars/all.yml file. To enable proxy provide values for proxy_ variables and set proxy_os_enable to true. Also append your network CIDR (e.g. 192.168.0.1/24) to the proxy_os_noproxy.

Sample configuration:

proxy_yum_url: "http://proxy.example.com:3128/"

proxy_os_enable: true
proxy_os_remove_old: true
proxy_os_http: "http://proxy.example.com:3128"
proxy_os_https: "http://proxy.example.com:3128"
proxy_os_ftp: "http://proxy.example.com:3128"
proxy_os_noproxy: "localhost,127.0.0.1,10.244.0.0/24,10.96.0.0/12,192.168.0.1/24"

NOTE: Ensure the no_proxy environment variable in your profile is set

export no_proxy="localhost,127.0.0.1,10.244.0.0/24,10.96.0.0/12,192.168.0.1/24"

Setting Git

GitHub Token

NOTE: Only required when cloning private repositories. Not needed when using github.com/open-ness repositories.

In order to clone private repositories GitHub token must be provided.

To generate GitHub token refer to GitHub help - Creating a personal access token for the command line.

To provide the token, edit value of git_repo_token variable in in group_vars/all.yml.

Customize tag/commit/sha to checkout

Specific tag, commit or sha can be checked out by setting git_repo_branch variable in group_vars/edgenode_group.yml for Edge Nodes and groups_vars/controller_group.yml for Kubernetes master / Edge Controller

Running playbooks

For convenience, playbooks can be executed by running helper deployment scripts.

NOTE: All nodes provided in the inventory may reboot during the installation.

Convention for the scripts is: action_mode.sh [group]. Following scripts are available for Network Edge mode:

• deploy_ne.sh [ controller | nodes ]
• cleanup_ne.sh [ controller | nodes ]

To run deploy of only Edge Nodes or Edge Controller use deploy_ne.sh nodes and deploy_ne.sh controller respectively.

Developer  Guide and Troubleshooting

Developer Guide

Start by following the page Setting Up Your Development Environment, this covers items such as signing up for a linux foundation account, configuring git, installing gerrit and IDE recommendations.

Clone 5G-MEC-CLOUD-GAMING Code

Visit https://gerrit.akraino.org/r/admin/repos/5g-mec-cloud-gaming to obtain the git clone commands. 

Download Submodule

• git submodule update --init --recursive

Setup Environment

Enter the work directory:

• cd ./5g-mec-cloud-gaming

Execute the versify.sh script to set up the build environment:

       versify.sh script first installs Golang and ginkgo，then installs docker and docker-compose.

Golang：

wget https://dl.google.com/go/ go1.13.4.linux-amd64.tar.gz

export GOPATH=$HOME/go

export PATH=$PATH:$GOPATH/bin

Ginkgo：

go get github.com/onsi/ginkgo/ginkgo

go get github.com/onsi/gomega/

Docker：

yum install -y yum-utils  device-mapper-persistent-data  lvm2

yum-config-manager --add-repo https://download.docker.com/linux/centos/docker-ce.repo

yum install -y  docker-ce docker-ce-cli containerd.io

Docker-compose：

curl -L "https://github.com/docker/compose/releases/download/1.24.1/docker-compose-$(uname -s)-$(uname -m)" -o /usr/local/bin/docker-compose

chmod +x /usr/local/bin/docker-compose

ln -s /usr/local/bin/docker-compose /usr/bin/docker-compose

Running Playbooks

For convenience, playbooks can be executed by running helper deployment scripts.

NOTE: All nodes provided in the inventory may reboot during the installation.

Convention for the scripts is: action_mode.sh [group]. Following scripts are available for Network Edge mode:

• deploy_ne.sh [ controller | nodes ]

To run deploy of only Edge Nodes or Edge Controller use deploy_ne.sh nodes and deploy_ne.sh controller respectively. 

NOTE: Playbooks for Edge Controller/Kubernetes master must be executed before playbooks for Edge Nodes.

NOTE: Edge Nodes and Edge Controller must be set up on different machines.

Uninstall Guide

The role of cleanup playbook is to revert changes made by deploy playbooks. The convention for the scripts is: action_mode.sh [group].  Following script is available for cleanup:

• cleanup_ne.sh [ controller | nodes]

The teardown is made by going step by step in reverse order and undoing the steps. For example, playbooks for Edge Controller/Kubernetes master must be executed before playbooks for Edge Nodes. During the unistall operation, the cleanup script of Edge Nodes should be executed first, and then run the cleanup script of Edge Controller / Kubernetes master.

Note that there might be some leftovers created by installed software.

Troubleshooting

Proxy issues

For PRC users who have network problems, try the following mirrors.

• Kubernetes

Kubernetes repo URL: https://mirrors.aliyun.com/kubernetes/yum/repos/kubernetes-el7-x86_64, as a replacement of https://packages.cloud.google.com/yum/repos/kubernetes-el7-x86_64.

Kubernetes repo key: https://mirrors.aliyun.com/kubernetes/yum/doc/yum-key.gpg, as a replacement of https://packages.cloud.google.com/yum/doc/yum-key.gpg.

                                   https://mirrors.aliyun.com/kubernetes/yum/doc/rpm-package-key.gpg, as a replacement of https://packages.cloud.google.com/yum/doc/rpm-package-key.gpg.

•  Kubeovn

Kubeovn repo: https://gitee.com/mirrors/Kube-OVN.git, as a replacement of https://github.com/alauda/kube-ovn.git.

Kubeovn raw file repo: https://gitee.com/mirrors/Kube-OVN/raw, as a replacement of https://raw.githubusercontent.com/alauda/kube-ovn.

Useful Commands

To display pods deployed in the default namespace:

• kubectl get pods

...

edge GW (aka edgenode in openNESS)

5GCEmulator