Table of Contents

...

Note: EALTEdge Blueprint Deployment has been tested on Cloud VM and is not tested on Bare-Metal Environment. Though, theoretically deployment should work  in bare metal,  provided hardware and software prerequisites are met. Kindly refer R5 R6 - Test Documentation of Enterprise Applications on Lightweight 5G Telco Edge (EALTEdge) to get details on the tested deployment.

...

EALTEdge Installation Mode:

EALTEdge supports 2 Mode of installation: Multi Node and All-In-One (AIO) Node deployment.

AIO(All in One) mode: 

In this mode, all 3 nodes (OCD which is deployment node, Center node and Edge node) are deployed on single VM.

The logical deployment topology can be seen here.

Image Modified

MUNO(Multi Node) Mode:

In this mode, all 3 nodes (OCD which is deployment node, Center node and Edge node) can be deployed on multiple VM.

This mode can have a OCD node deployed on a VM, Center node deployed on same OCD VM or on different VM and EDGE node deployed on different VM.

The logical deployment topology can be seen here.

Image Modified

Bare Metal Deployment Guide

...

Once the execution is completed in console will see prompt "EALTEdge Environment Installed  , Components Install CENTER and EDGE Nodes Successfully"

...

##Now get ca certificate use below command
```
curl http://10.43.130.35:8200/v1/pki/ca/pem
```
##10.43.130.35 is your vault ip, need to replace with latest vault ip

Image Modified

Troubleshooting

...

...

...