Table of Contents

...

EALTEdge Installation Mode:

EALTEdge supports 2 Mode of installation: Multi Node and All-In-One (AIO) Node deployment.

AIO(All in One) mode: 

In this mode, all 3 nodes (OCD which is deployment node, Center node and Edge node) are deployed on single VM.

The logical deployment topology can be seen here.

Image Modified

MUNO(Multi Node) Mode:

In this mode, all 3 nodes (OCD which is deployment node, Center node and Edge node) can be deployed on multiple VM.

This mode can have a OCD node deployed on a VM, Center node deployed on same OCD VM or on different VM and EDGE node deployed on different VM.

The logical deployment topology can be seen here.

Image Modified

Bare Metal Deployment Guide

...

• NETWORK_INTERFACE: regex for network interface on the VM. (user can be check ineterrface name by ifconfig and provide inerface name accordingly for example like eth.* )  
• MASTER_IP: Here user can use the private IP as a MASTER_IPof a Controller node
•  PORTAL_IP:  If portal need to be access over internet then uncomment the  PORTAL_IP and use public IP as a PORTAL_IP otherwise portal will be accessible only on private IP default.

...

• NETWORK_INTERFACE: regex for network interface on the VM. (user can be check ineterrface name by ifconfig and provide inerface name accordingly for example like eth.* )  
• MASTER_IP: Here user can use the private IP as a MASTER_IP 
•  PORTAL_IP:  If portal need to be access over internet then uncomment the  PORTAL_IP and use public IP as a PORTAL_IP otherwise portal will be accessible only on private IP default.

• CONTROLLER_MASTER_IP:   IP of the Controller master which is used for Edge to connect

          ealt-edge/ocd/infra/playbooks/muno-config/edge/hosts-muno-edge

...

Once the execution is completed in console will see prompt "EALTEdge Environment Installed  , Components Install CENTER and EDGE Nodes Successfully"

...

##Now get ca certificate use below command
```
curl http://10.43.130.35:8200/v1/pki/ca/pem
```
##10.43.130.35 is your vault ip, need to replace with latest vault ip

Image Modified

Troubleshooting

...

...

...