Introduction

The guide covers the installation details which are related to Enterprise Applications on Lightweight 5G Telco Edge (EALTEdge) Blueprint.  

...

Once the execution is completed in console will see prompt "EALTEdge Environment Installed  , Components Install CENTER and EDGE Nodes Successfully"

...

1. git clone the ealt-edge repo, to download the software to install the EALTEdge Environment.

root@akraino-mec-0002:~# git clone "https://gerrit.akraino.org/r/ealt-edge"

2. go to CLI directory 

root@akraino-mec-0002:~#cd ealt/infra/cli/

root@akraino-mec-0002:~#chmod +x build _cli.sh

root@akraino-mec-0002:~#source build_cli.sh

root@akraino-mec-0002:~#cd ~/ealt-edge/ocd/infra/playbooks

Note: The CLI Commands to setup the environment should be executed only from above path.

3.  Edit the Configuration File : ealt-inventory.ini with the details of MECM and MEC Hosts. 

root@akraino-mec-0002:~#vi ealt-inventory.ini

4. Execute the below command to install EALTEdge Environment 

root@akraino-mec-0002:~#ealt init all 

Above command will install the various component. Refer the below table for detail information. 

Other CLI Commands:

Command to Install only Edge Node

root@akraino-mec-0002:~#ealt init edge

Snapshot Deployment Overview

...

##Now get ca certificate use below command
```
curl http://10.43.130.35:8200/v1/pki/ca/pem
```
##10.43.130.35 is your vault ip, need to replace with latest vault ip

Image Modified

Kong documentation

...

...

...

...