Page Comparison

Table of Contents

Introduction

...

This guide covers detailed information of the various types of deployments, detailed steps and what are the various components it will install. In addition, the guide provides information on hardware requirements, prerequisite software and minimum hardware requirements. On successful deployment, MECM Center and MEC Hosts Edge Nodes will be installed. The number of nodes in MECM Center cluster and MEC Host Edge node in the cluster is configurable. 

...

Once the execution is completed in console will see prompt "EALTEdge Environment Installed  , Components Install CENTER and EDGE Nodes Successfully"

...

1. git clone the ealt-edge repo, to download the software to install the EALTEdge Environment.

root@akraino-mec-0002:~# git clone "https://gerrit.akraino.org/r/ealt-edge"

2. go to CLI directory 

root@akraino-mec-0002:~#cd ealt/infra/cli/

root@akraino-mec-0002:~#chmod +x build _cli.sh

root@akraino-mec-0002:~#source build_cli.sh

root@akraino-mec-0002:~#cd ~/ealt-edge/ocd/infra/playbooks

Note: The CLI Commands to setup the environment should be executed only from above path.

3.  Edit the Configuration File : ealt-inventory.ini with the details of MECM and MEC Hosts. 

root@akraino-mec-0002:~#vi ealt-inventory.ini

4. Execute the below command to install EALTEdge Environment 

root@akraino-mec-0002:~#ealt init all 

Above command will install the various component. Refer the below table for detail information. 

Other CLI Commands:

Command to Install only Edge Node

root@akraino-mec-0002:~#ealt init edge

Deploying Application Packages : Using CLI

This feature is currently not supported in Release 4.  Will be modified based on the upstream EdgeGallery Project's feature on the next Release.

Snapshot Deployment Overview

...

...

...

...