Contents

IEC Reference Foundation Overview

This document provides a general description about the reference foundation of IEC. The Integrated Edge Cloud (IEC) will enable new functionalities and business models on the network edge. The benefits of running applications on the network edge are - Better latencies for end users - Less load on network since more data can be processed locally - Fully utilize the computation power of the edge devices

Currently, the chosen operating system(OS) is Ubuntu 16.04 and/or 18.04. The infrastructure orchestration of IEC is based on Kubernetes, which is a production-grade container orchestration with rich running eco-system. The current container network interface(CNI) solution chosen for Kubernetes is project Calico, which is a high performance, scalable, policy enabled and widely used container networking solution with rather easy installation and arm64 support. In the future, Contiv/VPP or OVN-Kubernetes would also be candidates for Kubernetes networking.

Networking and HW Prerequisites

TBD

Methods of Installation

To address a large variety of setups, multiple methods of deployment should be supported. 

Kubernetes Install for Ubuntu

Install Docker as Prerequisite

Please follow docker installation guide for Ubuntu arm64 to install Docker CE:

https://docs.docker.com/install/linux/docker-ce/ubuntu/

Please select the 18.06 version since it is the latest version kubelet supported.

  $DOCKER_VERSION=18.06.1
  $ARCH=arm64
  $curl -fsSL https://download.docker.com/linux/ubuntu/gpg | sudo apt-key add -
  $sudo apt-key fingerprint 0EBFCD88
  $sudo add-apt-repository \
  "deb [arch=${ARCH}] https://download.docker.com/linux/ubuntu \
  $(lsb_release -cs) \
  stable"

  $sudo apt-get update
  $sudo apt-get install -y docker-ce=${DOCKER_VERSION}~ce~3-0~ubuntu

Turn off all swap devices and files with: Disable swap on your machine

   $ sudo swapoff -a

Install Kubernetes with Kubeadm

kubeadm helps you bootstrap a minimum viable Kubernetes cluster that conforms to best practices which is a preferred installation method for IEC currently. Now we choose v1.13.0 as a current stable version of Kubernetes for arm64. Usually the current host(edge server/gateway)'s management interface is chosen as the Kubeapi-server advertise address which is indicated here as $MGMT_IP.

The common installation steps for both Kubernetes master and slave node are given as Linux shell scripts:

   $ sudo bash
   $ apt-get update && apt-get install -y apt-transport-https curl
   $ curl -s https://packages.cloud.google.com/apt/doc/apt-key.gpg | apt-key add -
   $ cat <<EOF >/etc/apt/sources.list.d/kubernetes.list
   $ deb https://apt.kubernetes.io/ kubernetes-xenial main
   $ EOF
   $ apt-get update
   $ apt-get install -y kubelet=1.13.0-00 kubeadm=1.13.0-00 kubectl=1.13.0-00
   $ apt-mark hold kubelet kubeadm kubectl
   $ sysctl net.bridge.bridge-nf-call-iptables=1

For host setup as Kubernetes master:

--pod-network-cidr is the subnet of the pod network and must not overlap with any of the host networks 
  (see https://kubernetes.io/docs/setup/independent/create-cluster-kubeadm/#pod-network for more details)

--apiserver-advertise-address is the IP on the master node to use for advertising the master’s IP 
  (see https://kubernetes.io/docs/setup/independent/create-cluster-kubeadm/#initializing-your-master for more details)

--service-cidr can be set up to be used for service VIPs and must not overlap with any of the host networks. 
  The default value is  "10.96.0.0/12". If you change the default, make sure you update the clusterIP address
  in the yaml file when installing etcd (in the steps below)

   $ sudo kubeadm config images pull
   $ MGMT_IP=<ip-address>
   $ sudo kubeadm init --pod-network-cidr=192.168.0.0/16 --apiserver-advertise-address=$MGMT_IP \
   --service-cidr=172.16.1.0/24

To start using your cluster, you need to run (as a regular user):

   $ mkdir -p $HOME/.kube
   $ sudo cp -i /etc/kubernetes/admin.conf $HOME/.kube/config
   $ sudo chown $(id -u):$(id -g) $HOME/.kube/config

or

   $ export KUBECONFIG=/etc/kubernetes/admin.conf

if you are the ``root`` user.

For hosts setup as Kubernetes slave:

   $ kubeadm join --token <token> <master-ip>:6443 --discovery-token-ca-cert-hash sha256:<hash>

which will skip ca-cert verification.
After the `slave` joining the Kubernetes cluster, in the master node, you could check the cluster
node with the command:

   $ kubectl get nodes

Install the Calico CNI Plugin to Kubernetes Cluster

Now we install a Calico network add-on so that Kubernetes pods can communicate with each other. The network must be deployed before any applications. Kubeadm only supports Container Networking Interface(CNI) based networks for which Calico has supported.

Install the Etcd Database

Please use the following command to install etcd database. 

   $ kubectl apply -f https://raw.githubusercontent.com/Jingzhao123/arm64TemporaryCalico/temporay_arm64/
   v3.3/getting-started/kubernetes/installation/hosted/etcd-arm64.yaml

Install the RBAC Roles required for Calico

   $ kubectl apply -f https://docs.projectcalico.org/v3.3/getting-started/kubernetes/installation/rbac.yaml

Install Calico to system

Firstly, we should get the configuration file from web site and modify the corresponding image from amd64 to arm64 version. Then, by using kubectl, the calico pod will be created.

   $ wget https://docs.projectcalico.org/v3.3/getting-started/kubernetes/installation/hosted/calico.yaml

Since the "quay.io/calico" image repo does not support does not multi-arch, we have to replace the “quay.io/calico” image path to "calico" which supports multi-arch.

   $ sed -i "s/quay.io\/calico/calico/" calico.yaml

Deploy the Calico using following command:

   $ kubectl apply -f calico.yaml

     In calico.yaml file, there is an option "IP_AUTODETECTION_METHOD" about choosing
     network interface. The default value is "first-found" which means the first valid
     IP address (except local interface, docker bridge). So if the number of network-interface
     is more than 1 on your server, you should configure it depends on your networking
     environments. If it does not configure it properly, there are some error about
     calico-node pod: "BGP not established with X.X.X.X".

Remove the taints on master node

   $ kubectl taint nodes --all node-role.kubernetes.io/master-

Verification for the Work of Kubernetes

Now we can verify the work of Kubernetes and Calico with Kubernets pod and service creation and accessing based on Nginx which is a widely used web server.

Firstly, create a file named nginx-app.yaml to describe a Pod and service by:

$ cat <<EOF >~/nginx-app.yaml
apiVersion: v1
kind: Service
metadata:
  name: nginx
  labels:
    app: nginx
spec:
  type: NodePort
  ports:
  - port: 80
    protocol: TCP
    name: http
  selector:
    app: nginx
---
apiVersion: v1
kind: ReplicationController
metadata:
  name: nginx
spec:
  replicas: 2
  template:
    metadata:
      labels:
        app: nginx
    spec:
      containers:
      - name: nginx
        #image: arm64v8/nginx:stable
        image: nginx
        ports:
        - containerPort: 80
EOF

then test the Kubernetes working status with the script:

   set -ex

   kubectl create -f ~/nginx-app.yaml
   kubectl get nodes
   kubectl get services
   kubectl get pods
   kubectl get rc

   r="0"
   while [ $r -ne "2" ]
   do
      r=$(kubectl get pods | grep Running | wc -l)
      sleep 60
   done

   svcip=$(kubectl get services nginx  -o json | grep clusterIP | cut -f4 -d'"')
   sleep 10
   wget http://$svcip
   #kubectl delete -f ./examples/nginx-app.yaml
   kubectl delete -f ./nginx-app.yaml
   kubectl get rc
   kubectl get pods
   kubectl get services

Helm Install on Arm64

Helm is a tool for managing Kubernetes charts. Charts are packages of pre-configured Kubernetes resources. The installation of Helm on arm64 is as follows:

     $ wget https://storage.googleapis.com/kubernetes-helm/helm-v2.12.3-linux-arm64.tar.gz
     $ tar -xvf helm-v2.12.3-linux-arm64.tar.gz
     $ sudo cp linux-arm64/helm /usr/bin
     $ sudo cp linux-arm64/tiller /usr/bin

Further Information

We would like to provide a walk through shell script to automate the installation of Kubernetes and Calico in the future. But this README is still useful for IEC developers and users.

For issues or anything on the reference foundation stack of IEC, you could contact:

Trevor Tao: trevor.tao@arm.com 

Jingzhao Ni: jingzhao.ni@arm.com 

Jianlin Lv: jianlin.lv@arm.com