Introduction

...

Note: ELIOT IotGateway Blueprint Deployment has been tested on Cloud VM and is not tested on Bare-Metal Environment. Though, theoretically deployment should work  in bare metal,  provided hardware and software prerequisites are met. Kindly refer R5 - Test Documentation of Edge Lightweight IotGateway (ELIOT) to get details on the tested deployment.

...

root@akraino-mec-0002:~# vi eliot-inventory.iniFor Edge Gallery installation:

4. Modify other configuration files
Edit the configuration file so that the IP addresses of the OCD, ELIOT Master Node, and IotGateway Node are <ocp_ip>, <master_ip>, and <edge_ip> respectively.
An example of the description of the configuration file when the admin password of HARBOR is <password> is shown below.

$ eliot/blueprints/iotgateway/playbooks/muno-config/controller/hosts-muno-controller
[master]
<master_ip>

$ eliot/blueprints/iotgateway/playbooks/muno-config/controller/var.yml

HARBOR_ADMIN_PASSWORD: <password>

# Could be true or false
# true: Deploy k8s NFS Server to keep the persistence of all pods' data
# false: No need to keep the persistence of all pods' data

# ENABLE_PERSISTENCE: true
ENABLE_PERSISTENCE: false

# ip for portals, will be set to private IP of master node default or
# reset it to be the public IP of master node here
# PORTAL_IP: xxx.xxx.xxx.xxx
PORTAL_IP: <master_ip>

$ eliot/blueprints/iotgateway/playbooks/muno-config/edge/hosts-muno-edge
[master]
<edge_ip>

$ eliot/blueprints/iotgateway/playbooks/muno-config/edge/var.yml

HARBOR_ADMIN_PASSWORD: <password>

# Could be true or false
# true: Deploy k8s NFS Server to keep the persistence of all pods' data
# false: No need to keep the persistence of all pods' data
ENABLE_PERSISTENCE: false

# ip for portals, will be set to private IP of master node default or
# reset it to be the public IP of master node here
# PORTAL_IP: xxx.xxx.xxx.xxx

# NIC name of master node
# If master node is with single NIC, not need to set it here and will get
# the default NIC name during the run time
# If master node is with multiple NICs, should set it here to be
# 2 different NICs
# EG_NODE_EDGE_MP1: eth0
# EG_NODE_EDGE_MM5: eth0

OCD_IP: <ocp_ip>

5.Send the git clone file from OCD to ELIOT Master Node and IotGateway Node.
$ scp -r ./eliot <node_ip>:~

For Edge Gallery installation:

Select one of Multi Node Inventory Mode (MUNO-Mode) or All in one mode (AIO mode) and install it.

MUNO-Mode:

Execute the below command:

...

Once the execution is completed in console will see prompt "ELIOTEdge Environment Installed  , Components Install ELIOT Master and EDGE Nodes Successfully"

...

EDGE / IotGateway Node

References

...