| Table of Contents |
|---|
...
This Wiki describes the steps on how to deploy SRIOV device plugin in edge location node and how to use SRIOV device plugin in K8s podICN.
...
Implement details
The SRIOV network device plugin is Kubernetes device plugin for discovering and advertising SRIOV network virtual functions (VFs) in a Kubernetes host. and it provides below features:
- Handles SRIOV capable/not-capable devices (NICs and Accelerators alike)
- Supports devices with both Kernel and userspace(uio and VFIO) drivers
- Allows resource grouping using "Selector"
- User configurable resourceName
- Detects Kubelet restarts and auto-re-register
- Detects Link status (for Linux network devices) and updates associated VFs health accordingly
- Extensible to support new device types with minimal effort if not already supported
To automatically deploy SRIOV network device plugin in ICN, KuD addon SRIOV device plugin includes:
...
(1) Install and probe Intel Nic kernel driver (e.g. iavf.ko for Intel Ethernet Controller 700 series etc.), it requires an input parameter for the interface (e.g. eno2) which the virtual functions will be created on.
(2) Enable virtual functions (VFs) on assigned interface.
Daemon set yaml:
(1) sriov-cni.yaml: deploy sriov cni plugin as daemon set in edge location node, the sriov cni plugin is responsible to create network interface based on allocated SRIOV VF when creating pod.
(2) sriovdp-daemonset.yaml: deploy sriov network device plugin as daemon set in edge location node. , the sriov network device plugin is responsible to discovery and advertise SRIOV VFs to K8s.
...
kubectl exec -i pod-case-01 ip addr 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever 3: eth0@if108: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1450 qdisc noqueue state UP group default link/ether a2:e7:69:81:c7:3e brd ff:ff:ff:ff:ff:ff link-netnsid 0 inet 10.244.0.162/24 scope global eth0 valid_lft forever preferred_lft forever 36: net1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP group default qlen 1000 link/ether da:e9:13:20:f5:98 brd ff:ff:ff:ff:ff:ff inet 10.56.206.6/24 scope global net1 valid_lft forever preferred_lft forever |
|---|
ReferenceReferences: