Table of Contents outline true
Introduction
| outline | true |
|---|
...
Hostname | CPU Model | Memory | Storage | 1GbE: NIC#, VLAN, (Connected extreme 480 switch) | 10GbE: NIC# VLAN, Network (Connected with IZ1 switch) |
|---|---|---|---|---|---|
Jump | Intel 2xE5-2699 | 64GB | 3TB (Sata) | IF0: VLAN 110 (DMZ) | IF2: VLAN 112 (Private) |
<--- SM comment "DMZ may not mean anything to customer. Lets be consistent. Can we replace IF0, IF1 etc with Net A, Net BThis is redundant, is captured under HW and SW requirements" >>>
...
Hostname | CPU Model | Memory | Storage | 1GbE: NIC#, VLAN, (Connected extreme 480 switch) | 10GbE: NIC# VLAN, Network (Connected with IZ1 switch) |
|---|---|---|---|---|---|
node1 | Intel 2xE5-2699 | 64GB | 3TB (Sata) | IF0: VLAN 110 (DMZ) | IF2: VLAN 112 (Private) |
node2 | Intel 2xE5-2699 | 64GB | 3TB (Sata) | IF0: VLAN 110 (DMZ) | IF2: VLAN 112 (Private) |
node3 | Intel 2xE5-2699 | 64GB | 3TB (Sata) | IF0: VLAN 110 (DMZ) | IF2: VLAN 112 (Private) |
Compute server Software Requirements:
...
Frequently Asked Questions
How to setup IPMI?
First, make sure the IPMI tool is installed in your servers, if not install them using apt install ipmitool
Then, check for the ipmitool information of each servers using the command "ipmitool lan print 1"
If the above command doesn't show the IPMI information, then setup the IPMI static IP address using following instruction
- Mostly easy way to set up IPMI topology in your lab setup is by using IPMI tool.
- Using IPMI tool - https://www.thomas-krenn.com/en/wiki/Configuring_IPMI_under_Linux_using_ipmitool
- IPMI information can be considered during the BIOS setting as well.
BMC web console url is not working?
...