Page Comparison

...

• Export Restful API interface to support configuration of MWAN3, Firewall & NAT, IpSec.
• Site-to-Site tunnels across edges & edges & central orchestrators and application managers

SDEWAN Service

SDEWAN service restful API provides the capability to list available SDEWAN services, get service status and execute service operation.

Common Error code:

...

Error Response:

...

GET /cgi-bin/luci/sdewan/v1/services

Lists all available sdewan services supported by SDEWAN CNF

Request: N/A

Response

...

Response Parameters

...

PUT /cgi-bin/luci/sdewan/v1/service/{service}/

Execute a operation for a service

Request: 

Request Parameters

...

Response Example

...

Response

...

Response Parameters

...

Response Example

...

MWAN3

OpenWRT MWAN3 configuration includes below sections:

• Global: common configuration special used to configure routable loopback address (for OpenWRT 18.06)
• Interface: define how each WAN interface is tested for up/down status
• Member: represents an interface with a metric and a weight value
• Policy: defines how traffic is routed through the different WAN interface(s)
• Rule: describes what traffic to match and what policy to assign for that traffic.

SDEWAN CNF will be created with Global and Interface sections initialized based on CNF allocated interfaces.

SD-EWAN MWAN3 CNF API provides support to get/create/update/delete MWAN3 Rule, Policy (with Member).

MWAN3 Policy

GET /cgi-bin/luci/sdewan/mwan3/v1/policies

Lists all defined policies

Request: N/A

Response

...

Response Parameters

...

{
    "policies": [

        {

            "name":"balanced",

            "members": [

                {

                      "interface": "net1",

                      "metric" 1,

                      "weight": 2

                }

                {

                      "interface": "net2",

                      "metric" 1,

                      "weight": 1

                }

             ]

        }

    ]
}

GET /cgi-bin/luci/sdewan/mwan3/v1/policy/{policy}

Get a policy

Request: N/A

Request Parameters

...

Response

...

Response Parameters

...

{

      "name": "balanced",

       "members": [

           {

               "interface": "net1",

               "metric" 1,

               "weight": 2

            }

            {

                "interface": "net2",

                "metric" 1,

                 "weight": 1

            }

       ]

}

POST /cgi-bin/luci/sdewan/mwan3/v1/policy

create a new policy

Request:

...

Request Parameters: same with GET's response request

...

Response

• Normal response codes: 201
• Error response codes: 400, 401

PUT /cgi-bin/luci/sdewan/mwan3/v1/policy/{policy}

update a policy

Request:

Request Parameters:

...

{

       "members": [

           {

               "interface": "net1",

               "metric" 1,

               "weight": 2

            }

            {

                "interface": "net2",

                "metric" 1,

                 "weight": 1

            }

       ]

}

Response

• Normal response codes: 204
• Error response codes: 400, 401, 404

DELETE /cgi-bin/luci/sdewan/mwan3/v1/policy/{policy}

delete a policy

...

Architecture

SDEWAN CNF enhances OpenWRT Luci web interface with SDEWAN controllers to provide Restful API for network functions' configuration and control.

Image Added

CNF includes below modules:

• MWAN3: mwan3 configuration for multiple WAN links’ management
• Firewall: fw3 configuration for firewall rule, NAT rule.
• IpSec: strongswan configuration to setup security tunnel between CNFs
• DNS/DHCP: dnsmasq configuration for DNS and DHCP (ip4) or odhcpd configuration for DHCP (ip6)
• BGP/OSPF: bird configuration for BGP/OSPF auto routing
• Service: manage (e.g. start, stop, restart etc.) lifecycle of network function applications (e.g. mwan3, fw3, strongswan etc.)
• Runtime States: exports system log for debugging

APIs

Common Error code:

Error Response:

SDEWAN Service

SDEWAN service restful API provides the capability to list available SDEWAN services, get service status and execute service operation.

PUT /cgi-bin/luci/sdewan/v1/services/{service-name}/

Execute a operation for a service

Request: 

• Request Parameters

  Name	In	Type	Description
  service-name	path	string	service name, valid value are "mwan3", "firewall", "ipsec"
  action	body	string	action to be executed. valid value are "start", "stop", "restart", "reload"

  
  

• Request Example

  {     "action": "start" }

  
  

Response

• Normal response code: 200
• Error response code: 400 (e.g. invalid action)

• Response Parameters

  Name	In	Type	Description
  result	body	string	operation execution result

  
  

• Response Example

  {     "result": "success" }

  
  

GET /cgi-bin/luci/sdewan/v1/services

Lists all available sdewan services supported by SDEWAN CNF

Request: N/A

Response

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  services	body	array	a list of supported service

  
  

• Response Example

  
  

  {     "services": ["mwan3", "firewall", "ipsec"] }

  
  

SDEWAN Interface

SDEWAN interface API provide network interfaces information and control to up/down a network interface

PUT /cgi-bin/luci/sdewan/v1/interfaces/{interface}/

Execute a operation for a service

Request: 

• Request Parameters

  Name	In	Type	Description
  interface	path	string	interface name, e.g. "eth0"
  action	body	string	action to be executed. valid value are "up", "down"

  
  

• Request Example

  {     "action": "up" }

  
  

Response

• Normal response code: 200
• Error response code: 400 (e.g. invalid action), 404 (e.g. interface not found)

• Response Parameters

  Name	In	Type	Description
  result	body	string	operation execution result

  
  

• Response Example

  {     "result": "success" }

  
  

GET /cgi-bin/luci/sdewan/v1/interfaces

Lists all available network interfaces of the SDEWAN CNF

Request: N/A

Response

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  interfaces	body	array	a list of available network interfaces
  ip_address	body	array	ip address of the interface
  ip6_address	body	array	ipv6 address of the interface
  mac_address	body	string	mac address of the interface
  status	body	string	interface status, valid value are "UP", "DOWN"
  received_packets	body	string	number of received packets
  send_packets	body	string	number of send packaets

  
  

• Response Example

  
  

  {"interfaces": [     { "ip_address: ["10.0.0.1"],        "name":"eth0",        "status":"UP",        "send_packets":"19148",       "mac_address":"22:22:22:22:22:22",      "receive_packets":"20923" } ]}

  
  

GET /cgi-bin/luci/sdewan/v1/interfaces/{interface-name}

get information of a network interfaces of the SDEWAN CNF

Request: N/A

Response

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  interface-name	path	string	interface name
  ip_address	body	array	ip address of the interface
  ip6_address	body	array	ipv6 address of the interface
  mac_address	body	string	mac address of the interface
  status	body	string	interface status, valid value are "UP", "DOWN"
  received_packets	body	string	number of received packets
  send_packets	body	string	number of send packaets

  
  

• Response Example

  
  

  { "ip_address: ["10.0.0.1"],        "name":"eth0",        "status":"UP",        "send_packets":"19148",       "mac_address":"22:22:22:22:22:22",      "receive_packets":"20923" }

  
  

MWAN3

OpenWRT MWAN3 configuration includes below sections:

• Global: common configuration special used to configure routable loopback address (for OpenWRT 18.06)
• Interface: define how each WAN interface is tested for up/down status
• Member: represents an interface with a metric and a weight value
• Policy: defines how traffic is routed through the different WAN interface(s)
• Rule: describes what traffic to match and what policy to assign for that traffic.

SDEWAN CNF will be created with Global and Interface sections initialized based on CNF allocated interfaces.

SD-EWAN MWAN3 CNF API provides support to get/create/update/delete MWAN3 Rule, Policy (with Member).

MWAN3 Policy

POST /cgi-bin/luci/sdewan/mwan3/v1/policies

create a new policy

Request:

• Request Parameters: same with PUT's request

• Request Example: same with PUT's  example

  
  

Response

• Normal response codes: 201
• Error response codes: 400, 401

PUT /cgi-bin/luci/sdewan/mwan3/v1/policies/{policy-name}

update a policy

Request:

• Request Parameters:

  Name	In	Type	Description
  policy-name	path	string	policy name
  members	body	array	policy members
  interface	body	string	member interface name
  metric	body	int	(optional) default: 1, members within one policy with a lower metric have precedence over higher metric members
  weight	body	int	(optional) default: 1, members with same metric will distribute load based on this weight value

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/policies/balanced

  {        "members": [            {                "interface": "net1",                "metric" 1,                "weight": 2             }             {                 "interface": "net2",                 "metric" 1,                  "weight": 1             }        ] }

  
  

Response

• Normal response codes: 204
• Error response codes: 400, 401, 404

GET /cgi-bin/luci/sdewan/mwan3/v1/policies

Lists all defined policies

Request: N/A

Response

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  policies	body	array	a list of defined policies

  
  

• Response Example

  
  

  {     "policies": [         {             "name":"balanced",             "members": [                 {                       "interface": "net1",                       "metric" 1,                       "weight": 2                 }                 {                       "interface": "net2",                       "metric" 1,                       "weight": 1                 }              ]         }     ] }

  
  

GET /cgi-bin/luci/sdewan/mwan3/v1/policies/{policy-name}

Get a policy

Request: N/A

• Request Parameters

  Name	In	Type	Description
  policy-name	path	string	policy name

  
  

Response

• Normal response codes: 200
• Error response code: 404

• Response Parameters

  Name	In	Type	Description
  name	body	string	policy name
  members	body	array	policy members
  interface	body	string	member interface name
  metric	body	int	(optional) default: 1, members within one policy with a lower metric have precedence over higher metric members
  weight	body	int	(optional) default: 1, members with same metric will distribute load based on this weight value

  
  

• Response Example

  
  

  {       "name": "balanced",        "members": [            {                "interface": "net1",                "metric" 1,                "weight": 2             }             {                 "interface": "net2",                 "metric" 1,                  "weight": 1             }        ] }

  
  

DELETE /cgi-bin/luci/sdewan/mwan3/v1/policies/{policy-name}

delete a policy

Request:

• Request Parameters

  Name	In	Type	Description
  policy-name	path	string	policy name

  
  

Response

• Normal response codes: 200
• Error response codes: 401, 404

MWAN3 Rule

POST /cgi-bin/luci/sdewan/mwan3/v1/rules

create a new rule

Request:

• Request Parameters: same with PUT's request

• Request Example: same with PUT's example

  
  

Response

• Normal response codes: 201
• Error response codes: 400, 401

PUT /cgi-bin/luci/sdewan/mwan3/v1/rules/{rule-name}

update a policy

Request:

• Request Parameters

  Name	In	Type	Description
  rule-name	path	string	rule name
  policy	body	string	policy used for the rule
  src_ip	body	string	(optional) source ip address
  src_port	body	string	(optional) source port or port range
  dest_ip	body	string	(optional) destination ip address
  dest_port	body	string	(optional) destination port or port range
  proto	body	string	(optional) protocol for the rule. Valid values: "tcp", "udp", "icmp", "all"
  family	body	string	(optional) address family. Valid values: "ipv4", "ipv6", "all"
  sticky	body	string	(optional) default: 0, allow traffic from the same source ip address within the timeout limit to use same wan interface as prior session
  timeout	body	int	(optional) default: 600,  Stickiness timeout value in seconds

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/rules/default_rule

  {     "dest_ip": "0.0.0.0/0"，      "policy": "balanced" }

  
  

Response

• Normal response codes: 204
• Error response codes: 400, 401, 404

GET /cgi-bin/luci/sdewan/mwan3/v1/rules

Lists all defined rules

Request: N/A

Response

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  rules	body	array	a list of defined rules

  
  

• Response Example

  
  

  {     "rules": [         {             "name":"default_rule",             "dest_ip": "0.0.0.0/0"，             "policy": "balanced"         }      ] }

  
  

GET /cgi-bin/luci/sdewan/mwan3/v1/rules/{rule-name}

Get a rule

Request: N/A

• Request Parameters

  Name	In	Type	Description
  rule-name	path	string	rule name

  
  

Response

• Normal response codes: 200
• Error response code: 404

• Response Parameters

  Name	In	Type	Description
  name	body	string	rule name
  policy	body	string	policy used for the rule
  src_ip	body	string	(optional) source ip address
  src_port	body	string	(optional) source port or port range
  dest_ip	body	string	(optional) destination ip address
  dest_port	body	string	(optional) destination port or port range
  proto	body	string	(optional) protocol for the rule. Valid values: "tcp", "udp", "icmp", "all"
  family	body	string	(optional) address family. Valid values: "ipv4", "ipv6", "all"
  sticky	body	string	(optional) default: 0, allow traffic from the same source ip address within the timeout limit to use same wan interface as prior session
  timeout	body	int	(optional) default: 600,  Stickiness timeout value in seconds

  
  

• Response Example

  
  

  #ipv4 example {     "name":"default_rule",     "dest_ip": "0.0.0.0/0"，      "policy": "balanced" } #ipv6 example {     "name":"default_ipv6_rule",     "dest_ip": "fdca:f00:ba3::/64"，      "policy": "balanced" }

  
  

DELETE /cgi-bin/luci/sdewan/mwan3/v1/rules/{rule-name}

delete a rule

Request:

• Request Parameters

  Name	In	Type	Description
  rule-name	path	string	rule name

  
  

Response

• Normal response codes: 200
• Error response codes: 401, 404

Firewall

OpenWRT Firewall configuration includes below sections:

• Default: declares global firewall settings which do not belong to specific zones
• Include: used to enable customized firewall scripts
• Zone: groups one or more interfaces and serves as a source or destination for forwardings, rules and redirects.
• Forwarding: control the traffic between zones
• Redirect: defines port forwarding (NAT) rules
• Rule: defines basic accept, drop, or reject rules to allow or restrict access to specific ports or hosts.

SDEWAN CNF will be created with Default sections initialized. Include section will not be implemented in this release.

SD-EWAN Firewall API provides support to get/create/update/delete Firewall Zone, Redirect, Rule and Forwardings

Zone

POST /cgi-bin/luci/sdewan/firewall/v1/zones

create a new zone

Request:

• Request Parameters: same with PUT's request

• Request Example: same with PUT's example

  
  

Response

• Normal response codes: 201
• Error response codes: 400, 401

PUT /cgi-bin/luci/sdewan/firewall/v1/zones/{zone-name}

update a zone

Request:

• Request Parameters:

  Name	In	Type	Description
  zone-name	path	string	zone name
  network	body	array	List of interfaces attached to this zone
  masq	body	boolean	Specifies whether outgoing zone traffic should be masqueraded. "0" or "1"
  masq_src	body	string	Limit masquerading to the given source subnets.
  masq_dest	body	string	Limit masquerading to the given destination subnets
  masq_allow_invalid	body	boolean	whether add DROP INVALID rules
  mtu_fix	body	boolean	Enable MSS clamping for outgoing zone traffic
  input	body	string	Default policy (ACCEPT, REJECT, DROP) for incoming zone traffic.
  forward	body	string	Default policy (ACCEPT, REJECT, DROP) for forwarded zone traffic.
  output	body	string	Default policy (ACCEPT, REJECT, DROP) for output zone traffic.
  family	body	string	The protocol family (ipv4, ipv6 or any) these iptables rules are for.
  subnet	body	string	List of IP subnets attached to this zone
  extra_src	body	string	Extra arguments passed directly to iptables for source classification rules.
  etra_dest	body	string	Extra arguments passed directly to iptables for destination classification rules.

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/zones/wan

  {        "network":"wan"，        "input": "REJECT"，        "output": "ACCEPT"，       "forward": "REJECT"，        "masq": "1"，        "mtu_fix": "1" }

  
  

Response

• Normal response codes: 204
• Error response codes: 400, 401, 404

GET /cgi-bin/luci/sdewan/firewall/v1/zones

Lists all defined zones

Request: N/A

Response

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  zones	body	array	a list of defined zones

  
  

• Response Example

  
  

  {     "zones": [         {             "name":"wan"，             "network":"wan"，             "input": "REJECT"，             "output": "ACCEPT"，             "forward": "REJECT"，             "masq": "1"，             "mtu_fix": "1"          }     ] }

  
  

GET /cgi-bin/luci/sdewan/firewall/v1/zones/{zone-name}

Get a zone

Request: N/A

• Request Parameters

  Name	In	Type	Description
  zone-name	path	string	zone name

  
  

Response

• Normal response codes: 200
• Error response code: 404

• Response Parameters

  Name	In	Type	Description
  name	body	string	(Required) zone name
  network	body	array	List of interfaces attached to this zone
  masq	body	boolean	Specifies whether outgoing zone traffic should be masqueraded. "0" or "1"
  masq_src	body	string	Limit masquerading to the given source subnets.
  masq_dest	body	string	Limit masquerading to the given destination subnets
  masq_allow_invalid	body	boolean	whether add DROP INVALID rules
  mtu_fix	body	boolean	Enable MSS clamping for outgoing zone traffic
  input	body	string	Default policy (ACCEPT, REJECT, DROP) for incoming zone traffic.
  forward	body	string	Default policy (ACCEPT, REJECT, DROP) for forwarded zone traffic.
  output	body	string	Default policy (ACCEPT, REJECT, DROP) for output zone traffic.
  family	body	string	The protocol family (ipv4, ipv6 or any) these iptables rules are for.
  subnet	body	string	List of IP subnets attached to this zone
  extra_src	body	string	Extra arguments passed directly to iptables for source classification rules.
  etra_dest	body	string	Extra arguments passed directly to iptables for destination classification rules.

  
  

• Response Example

  
  

  {       "name":"wan",        "network":"wan"，        "input": "REJECT"，        "output": "ACCEPT"，       "forward": "REJECT"，        "masq": "1"，        "mtu_fix": "1"， }

  
  

DELETE /cgi-bin/luci/sdewan/firewall/v1/zones/{zone-name}

delete a zone

Request:

• Request Parameters

  Name	In	Type	Description
  zone-name	path	string	zone name

  
  

Response

• Normal response codes: 200
• Error response codes: 401, 404

Redirect

POST /cgi-bin/luci/sdewan/firewall/v1/redirects

create a new redirect

Request:

• Request Parameters: same with PUT's request

• Request Example: same with PUT's example

  
  

Response

• Normal response codes: 201
• Error response codes: 400, 401

PUT /cgi-bin/luci/sdewan/firewall/v1/redirects/{redirect-name}

update a redirect

Request:

• Request Parameters:

  Name	In	Type	Description
  redirect-name	path	string	redirect name
  src	body	string	(Required for DNAT) traffic source zone
  src_ip	body	string	Match incoming traffic from the specified source ip address.
  src_dip	body	string	(Required for SNAT) For DNAT, match incoming traffic directed at the given destination ip address. For SNAT rewrite the source address to the given address.
  src_mac	body	string	Match incoming traffic from the specified mac address.
  src_port	body	port or range	Match incoming traffic originating from the given source port or port range on the client host.
  src_dport	body	port or range	For DNAT, match incoming traffic directed at the given destination port or port range on this host. For SNAT rewrite the source ports to the given value.
  proto	body	string	Match incoming traffic using the given protocol. Can be one of tcp, udp, tcpudp, udplite, icmp, esp, ah, sctp, or all
  dest	body	string	Specifies the traffic destination zone. Must refer to one of the defined zone names.
  dest_ip	body	string	For DNAT, redirect matches incoming traffic to the specified internal host. For SNAT, it matches traffic directed at the given address.
  dest_port	body	port or range	For DNAT, redirect matched incoming traffic to the given port on the internal host. For SNAT, match traffic directed at the given ports.
  mark	body	string	match traffic against the given firewall mark
  target	body	string	(Required) NAT target: SNAT, DNAT
  family	body	string	Protocol family (ipv4, ipv6 or any) to generate iptables rules for

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/redirects/dnat_lan

  {     "src":"wan",     "src_dport":"19900",     "dest":"lan",     "dest_ip":"192.168.1.1",     "dest_port":"22",     "proto":"tcp",     "target":"DNAT" }

  
  

Response

• Normal response codes: 204
• Error response codes: 400, 401, 404

GET /cgi-bin/luci/sdewan/firewall/v1/redirects

Lists all defined redirects

Request: N/A

Response

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  redirects	body	array	a list of defined redirects

  
  

• Response Example

  
  

  {     "redirects": [         {             "name":"dnat_lan",             "src":"wan",             "src_dport":"19900",             "dest":"lan",             "dest_ip":"192.168.1.1",             "dest_port":"22",             "proto":"tcp",             "target":"DNAT"       }     ] }

  
  

GET /cgi-bin/luci/sdewan/firewall/v1/redirects/{redirect-name}

Get a redirect

Request: N/A

• Request Parameters

  policy

  Name	In	Type	Description
  redirect-name	path	string	policy name

Response

• Normal response codes: 200
• Error response codes: 401, 404

MWAN3 Rule

GET /cgi-bin/luci/sdewan/mwan3/v1/rules

Lists all defined rules

...

• redirect name

  
  

Response

• Normal response codes: 200
• Error response code: 404

• Response Parameters

  Name	In	Type	Description

  rules

  name

  body

  arraya list of defined rules
  Response Example

  {
      "rules": [

          {

              "name":"default_rule",

              "dest_ip": "0.0.0.0/0"，

              "policy": "balanced"

          }

       ]

  }

GET /cgi-bin/luci/sdewan/mwan3/v1/rule/{rule}

Get a rule

Request: N/A

Request Parameters

...

Response

• Normal response codes: 200
• Error response code: 404

• Response Parameters

  NameInTypeDescriptionnamebodystringrule namepolicybodystringpolicy used for the rulesrc_ipbodystring(optional) source ip addresssrc_portbodystring(optional) source port or port rangedest_ipbodystring(optional) destination ip addressdest_portbodystring(optional) destination port or port rangeprotobody string (optional) protocol for the rule. Valid values: "tcp", "udp", "icmp", "all"familybody string (optional) address family. Valid values: "ipv4", "ipv6", "all" stickybody string (optional) default: 0, allow traffic from the same source ip address within the timeout limit to use same wan interface as prior session timeoutbody int (optional) default: 600,  Stickiness timeout value in secondsResponse Example

  {

      "name":"default_rule",

      "dest_ip": "0.0.0.0/0"，

       "policy": "balanced"

  }

  string	(Required) forwarding name
  src	body	string	(Required for DNAT) traffic source zone
  src_ip	body	string	Match incoming traffic from the specified source ip address.
  src_dip	body	string	(Required for SNAT) For DNAT, match incoming traffic directed at the given destination ip address. For SNAT rewrite the source address to the given address.
  src_mac	body	string	Match incoming traffic from the specified mac address.
  src_port	body	port or range	Match incoming traffic originating from the given source port or port range on the client host.
  src_dport	body	port or range	For DNAT, match incoming traffic directed at the given destination port or port range on this host. For SNAT rewrite the source ports to the given value.
  proto	body	string	Match incoming traffic using the given protocol. Can be one of tcp, udp, tcpudp, udplite, icmp, esp, ah, sctp, or all
  dest	body	string	Specifies the traffic destination zone. Must refer to one of the defined zone names.
  dest_ip	body	string	For DNAT, redirect matches incoming traffic to the specified internal host. For SNAT, it matches traffic directed at the given address.
  dest_port	body	port or range	For DNAT, redirect matched incoming traffic to the given port on the internal host. For SNAT, match traffic directed at the given ports.
  mark	body	string	match traffic against the given firewall mark
  target	body	string	(Required) NAT target: SNAT, DNAT
  family	body	string	Protocol family (ipv4, ipv6 or any) to generate iptables rules for

  
  

• Response Example

  
  

  {     "name":"dnat_lan",     "src":"wan",     "src_dport":"19900",     "dest":"lan",     "dest_ip":"192.168.1.1",     "dest_port":"22",     "proto":"tcp",     "target":"DNAT" }

  
  

DELETE /cgi-bin/luci/sdewan/firewall/v1/redirects/{redirect-name}

delete a redirect rule

Request:

• Request Parameters

  Name	In	Type	Description
  redirect-name	path	string	redirect name

  
  

Response

• Normal response codes: 200
• Error response codes: 401, 404

Rule

POST /cgi-bin/luci/sdewan/mwan3firewall/v1/rulerules

create a new rule

Request:

• Request Parameters: same with GETPUT's response request

• Request Example: same with GETPUT's response example

  
  

Response

• Normal response codes: 201
• Error response codes: 400, 401

...

PUT /cgi-bin/luci/sdewan/mwan3firewall/v1/rulerules/{rulerule-name}

update a policyrule

Request:

• Request Parameters:

  policy

  Name	In	Type	Description
  rule-name	path	string	rule name
  src	body	string	(Required) traffic source zone
  src_ip	body	string

  rule name

  Match incoming traffic from the specified source ip address
  src_mac	body	string

  policy used for the rulesrc_ipbodystring(optional) source ip addresssrc_portbodystring(optional) source port or port rangedest_ipbodystring(optional) destination ip addressdest_portbodystring(optional) destination port or port rangeprotobody string (optional) protocol for the rule. Valid values: "tcp", "udp", "icmp", "all"familybody string (optional) address family. Valid values: "ipv4", "ipv6", "all" stickybody string (optional) default: 0, allow traffic from the same source ip address within the timeout limit to use same wan interface as prior session timeoutbody int (optional) default: 600,  Stickiness timeout value in seconds
  Request Example

  {

      "dest_ip": "0.0.0.0/0"，

       "policy": "balanced"

  }

Response

• Normal response codes: 204
• Error response codes: 400, 401, 404

DELETE /cgi-bin/luci/sdewan/mwan3/v1/rule/{rule}

delete a rule

Request:

Request Parameters

...

Response

• Normal response codes: 200
• Error response codes: 401, 404

Firewall

OpenWRT Firewall configuration includes below sections:

• Default: declares global firewall settings which do not belong to specific zones
• Include: used to enable customized firewall scripts
• Zone: groups one or more interfaces and serves as a source or destination for forwardings, rules and redirects.
• Forwarding: control the traffic between zones
• Redirect: defines port forwarding (NAT) rules
• Rule: defines basic accept, drop, or reject rules to allow or restrict access to specific ports or hosts.

SDEWAN CNF will be created with Default sections initialized. Include section will not be included in this release.

SD-EWAN Firewall API provides support to get/create/update/delete Firewall Zone, Redirect, Rule and Forwardings

Zone

• Match incoming traffic from the specified mac address
  src_port	body	port or range	Match incoming traffic from the specified source port or port range
  proto	body	string	Match incoming traffic using the given protocol. Can be one of tcp, udp, tcpudp, udplite, icmp, esp, ah, sctp, or all
  icmp_type	body	string	For protocol icmp select specific icmp types to match.
  dest	body	string	traffic destination zone. Must refer to one of the defined zone names, or * for any zone
  dest_ip	body	string	Match incoming traffic directed to the specified destination ip address
  dest_port	body	port or range	Match incoming traffic directed at the given destination port or port range
  mark	body	string	If specified, match traffic against the given firewall mark
  target	body	string	(Required) Firewall action (ACCEPT, REJECT, DROP, MARK, NOTRACK) for matched traffic
  set_mark	body	string	Zeroes out the bits given by mask and ORs value into the packet mark.
  set_xmark	body	string	Zeroes out the bits given by mask and XORs value into the packet mark
  family	body	string	Protocol family (ipv4, ipv6 or any) to generate iptables rules for
  extra	body	string	Extra arguments to pass to iptables. Useful mainly to specify additional match options, such as -m policy --dir in for IPsec.

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/rules/reject_lan_80

  {        "src":"lan"，        "src_ip": "192.168.1.2",        "src_port": "80",        "proto":"tcp",        "target":"REJECT" }

  
  

Response

• Normal response codes: 204
• Error response codes: 400, 401, 404

GET /cgi-bin/luci/sdewan/firewall/v1/zonesrules

Lists all defined zonesrules

Request: N/A

Response

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  zonesrules	body	array	a list of defined zonesrules

  
  

• Response Example

  
  

  {         "zonesrules": [                {                        "name":"wanreject_lan_80"，                       "networksrc":"wanlan"，            "input            "src_ip": "REJECT"，            "output192.168.1.2",            "src_port": "ACCEPT80"，,                       "forwardproto":"REJECTtcp"，,                        "masqtarget":"1"，            "mtu_fix": "1REJECT"                }     ] }

  
  

GET /cgi-bin/luci/sdewan/firewall/v1/zonerules/{zonerule-name}

Get a zonerule

Request: N/A

• Request Parameters

  Name	In	Type	Description
  zonerule-name	path	string	zone namerule name

  
  

Response

Response

• Normal response codes: 204
• Error response codes: 400, 401, 404

...

• Normal response codes: 200
• Error response code: 404

• Response Parameters

  Name	In	Type	Description
  name	body	string	(Required)

  zone namenetworkbodyarrayList of interfaces attached to this zonemasqbodybooleanSpecifies whether outgoing zone traffic should be masqueraded. "0" or "1"masq_srcbodystringLimit masquerading to the given source subnets.masq_dest

  rule name
  src	body	string

  Limit masquerading to the given destination subnetsmasq_allow_invalid

  (Required) traffic source zone
  src_ip	body

  booleanwhether add DROP INVALID rules mtu_fix 

  string	Match incoming traffic from the specified source ip address
  src_mac	body

  booleanEnable MSS clamping for outgoing zone traffic input body string Default policy (ACCEPT, REJECT, DROP) for incoming zone traffic. forward body string Default policy (ACCEPT, REJECT, DROP) for forwarded zone traffic. outputbody string Default policy (ACCEPT, REJECT, DROP) for output zone traffic. family body string The protocol family (ipv4, ipv6 or any) these iptables rules are for. subnet body string List of IP subnets attached to this zone extra_src body string Extra arguments passed directly to iptables for source classification rules.   etra_dest body string Extra arguments passed directly to iptables for destination classification rules.   
  Response Example

  {

        "name":"wan",

         "network":"wan"，

         "input": "REJECT"，

         "output": "ACCEPT"，

        "forward": "REJECT"，

         "masq": "1"，

         "mtu_fix": "1"，

  }

POST /cgi-bin/luci/sdewan/firewall/v1/zone

create a new zone

Request:

...

Request Parameters: same with GET's response request

...

Response

• Normal response codes: 201
• Error response codes: 400, 401

PUT /cgi-bin/luci/sdewan/firewall/v1/zone/{zone}

update a zone

Request:

Request Parameters:

...

{

       "network":"wan"，

       "input": "REJECT"，

       "output": "ACCEPT"，

      "forward": "REJECT"，

       "masq": "1"，

       "mtu_fix": "1"

}

• string	Match incoming traffic from the specified mac address
  src_port	body	port or range	Match incoming traffic from the specified source port or port range
  proto	body	string	Match incoming traffic using the given protocol. Can be one of tcp, udp, tcpudp, udplite, icmp, esp, ah, sctp, or all
  icmp_type	body	string	For protocol icmp select specific icmp types to match.
  dest	body	string	traffic destination zone. Must refer to one of the defined zone names, or * for any zone
  dest_ip	body	string	Match incoming traffic directed to the specified destination ip address
  dest_port	body	port or range	Match incoming traffic directed at the given destination port or port range
  mark	body	string	If specified, match traffic against the given firewall mark
  target	body	string	(Required) Firewall action (ACCEPT, REJECT, DROP, MARK, NOTRACK) for matched traffic
  set_mark	body	string	Zeroes out the bits given by mask and ORs value into the packet mark.
  set_xmark	body	string	Zeroes out the bits given by mask and XORs value into the packet mark
  family	body	string	Protocol family (ipv4, ipv6 or any) to generate iptables rules for
  extra	body	string	Extra arguments to pass to iptables. Useful mainly to specify additional match options, such as -m policy --dir in for IPsec.

  
  

• Response Example

  
  

  {        "name":"reject_lan_80"        "src":"lan"，        "src_ip": "192.168.1.2",        "src_port": "80",        "proto":"tcp",        "target":"REJECT" }

  
  

DELETE /cgi-bin/luci/sdewan/firewall/v1/rules/{rule-name}

delete a firewall rule

Request:

• Request Parameters

  Name	In	Type	Description
  rule-name	path	string	rule name

  
  

Response

• Normal response codes: 200
• Error response codes: 401, 404

Forwarding

POST /cgi-bin/luci/sdewan/firewall/v1/zone/{zone}delete a zoneforwardings

create a new forwarding

Request:

• Request Parameters

  NameInTypeDescriptionzonepathstringzone name

  : same with PUT's request

• Request Example: same with PUT's example

  
  

Response

• Normal response codes: 200201
• Error response codes: 400, 401, 404

Redirect

Rule

Forwarding

...

PUT /cgi-bin/luci/sdewan/firewall/v1/forwardingsLists all defined forwardings

Request: N/A

Response

...

/{forwarding-name}

update a forwarding

Request:

• Request Parameters:

  forwardings

  Name	In	Type	Description
  forwarding-name	path	string	forwarding name
  src	body	string	(Required) traffic source zone
  dest	body	string	(Required) traffic destination zone
  family	body	array	a list of defined forwardings

  Response Example

  {
      "forwardings": [

          {

            "name":"lan-wan",

            "

  string

  Protocol family (ipv4, ipv6 or any) to generate iptables rules for.

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/forwardings/lan_wan

  {        "src":"lan"，                  "dest": "wan"       }     ] } }

  
  

Response

• Normal response codes: 204
• Error response codes: 400, 401, 404

GET /cgi-bin/luci/sdewan/firewall/v1/forwarding/{forwarding}

Get a forwarding

Request: N/A

Request Parameters

...

Response

...

Response Parameters

...

forwardings

Lists all defined forwardings

Request: N/A

Response

...

Response

• Normal response codes: 201
• Error response codes: 400, 401

...

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  forwardings	body	array	a list of defined forwardings

  
  

• Response Example

  
  

  {           "forwardings": [         {           "name":"lan-_wan",                 "src":"lan"，           "dest": "wan"       }

POST /cgi-bin/luci/sdewan/firewall/v1/forwarding

create a new forwarding

Request:

...

Request Parameters: same with GET's response request

• ] }

  
  

GET /cgi-bin/luci/sdewan/firewall/v1/forwardingforwardings/{forwarding-name}

update Get a forwarding

Request: N/A

• Request Parameters

  Name	In	Type	Description
  forwarding-name	path	string	forwarding name

  
  

Response

• Normal response codes: 200
• Error response code: 404

• Response Parameters

  Name	In	Type	Description

  forwardingpathstringforwarding name{other params}bodysame with GET response
  Request Example

  {

         

  name	body	string	(Required) forwarding name
  src	body	string	(Required) traffic source zone
  dest	body	string	(Required) traffic destination zone
  family	body	string	Protocol family (ipv4, ipv6 or any) to generate iptables rules for.

  
  

• Response Example

  
  

  {       "name":"lan_wan",       "src":"lan"，              "dest": "wan" }

Response

• Normal response codes: 204
• Error response codes: 400, 401, 404

DELETE /cgi-bin/luci/sdewan/firewall/v1/forwardingforwardings/{forwarding-name}

delete a forwarding rule

...

• Request Parameters

  Name	In	Type	Description
  forwarding-name	path	string	forwarding name

  
  

...