Introduction
We had successfully validated REC SEBA installation with post-install validation test and additional test such as RIC Robot Test and nanobot in in AT&T Radio Edge Cloud SEBA Blueprint Validation Lab (MiddletownAtlanta, NJGA). These test cases have been identified manually with two different clusters such as HP Gen 10 and a Nokia OpenEdge cluster. More clusters will be test tested in the AT&T lab and Nokia other labs in the later releasereleases.
Post-install validation
A post installation verification is required to ensure that all nodes and services were properly deployed.
...
Expected Output: Docker version 1819.0903.2, build 62479626a30dfc
3. Confirm active state of required services
...
Output: The command output shows the number of REC SEBA nodes.
5. Verify Components
...
- Chart repository is up and running: (The curl command below is really one line.)
curl -sS -XGET --cacert /etc/chart-repo/ssl/ca.pem --cert /etc/chart-repo/ssl/chart-repo1.pem
--key /etc/chart-repo/ssl/chart-repo1-key.pem pem https://chart-repo.kube-system.svc.rec.io:8088/charts/index.yaml
Output: output is a yaml file.
...
helm list
Output: caas-infra.
Additional Testing
More detail of each testing cases will be added in the near future. For example
1. Install RIC Robot test on top of REC
This set of tests which created a deploy-able robot container for testing robot test cases for RIC. It adds the interfaces to RIC applications and then to turn them into test cases. It is used an initial view of the Xapp Manager REST Interface and some other references to the E2Manager interface.
2. Nanobot
This is a second set of tests which run as a job and then give a robot test report. The deployment steps are very similar than the RIC Robot test since we already have the existing repo which cloned as part of deploying ric_robot_suite. Instead of pulling an image from azure, we will build the container.After the SEBA helm charts are deployed, all containers in the default namespace are confirmed to be in a Completed or Running status. Additional testing with bbsim and/or ponsim is planned for future Akraino releases.
| No Format |
|---|
NAME READY STATUS RESTARTS AGE IP NODE NOMINATED NODE READINESS GATES
att-workflow-att-workflow-driver-6487d77db-rdwgk 1/1 Running 0 2m1s 10.244.0.27 192.168.12.52 <none> <none>
att-workflow-tosca-loader-7btvq 0/1 Completed 4 2m1s 10.244.1.37 192.168.12.51 <none> <none>
cord-platform-etcd-operator-etcd-backup-operator-84dfbc689vqsj9 1/1 Running 0 4m9s 10.244.2.13 192.168.12.53 <none> <none>
cord-platform-etcd-operator-etcd-operator-8b6c64548-nnj2r 1/1 Running 0 4m9s 10.244.2.14 192.168.12.53 <none> <none>
cord-platform-etcd-operator-etcd-restore-operator-7f5f5b95sdxw5 1/1 Running 0 4m9s 10.244.0.13 192.168.12.52 <none> <none>
cord-platform-grafana-74c589b6db-jqnpv 2/2 Running 0 4m9s 10.244.1.24 192.168.12.51 <none> <none>
cord-platform-kafka-0 1/1 Running 1 4m9s 10.244.1.25 192.168.12.51 <none> <none>
cord-platform-kafka-1 1/1 Running 0 2m31s 10.244.0.26 192.168.12.52 <none> <none>
cord-platform-kafka-2 1/1 Running 0 96s 10.244.2.29 192.168.12.53 <none> <none>
cord-platform-kibana-7459967f55-z7sk8 1/1 Running 0 4m9s 10.244.2.18 192.168.12.53 <none> <none>
cord-platform-logstash-0 1/1 Running 0 4m9s 10.244.0.15 192.168.12.52 <none> <none>
cord-platform-onos-5b95b8f489-9s56b 2/2 Running 0 4m8s 10.244.0.19 192.168.12.52 <none> <none>
cord-platform-prometheus-alertmanager-7df4f44f4d-tbfcl 2/2 Running 0 4m9s 10.244.2.15 192.168.12.53 <none> <none>
cord-platform-prometheus-kube-state-metrics-76c8565f87-wslpw 1/1 Running 0 4m9s 10.244.0.14 192.168.12.52 <none> <none>
cord-platform-prometheus-pushgateway-849c597464-pxhrf 1/1 Running 0 4m9s 10.244.1.26 192.168.12.51 <none> <none>
cord-platform-prometheus-server-555b77dcd9-brtfk 2/2 Running 0 4m9s 10.244.2.17 192.168.12.53 <none> <none>
cord-platform-zookeeper-0 1/1 Running 0 4m9s 10.244.0.16 192.168.12.52 <none> <none>
cord-platform-zookeeper-1 1/1 Running 0 3m35s 10.244.1.31 192.168.12.51 <none> <none>
cord-platform-zookeeper-2 1/1 Running 0 2m47s 10.244.2.27 192.168.12.53 <none> <none>
etcd-cluster-4btz528zxt 1/1 Running 0 2m38s 10.244.0.25 192.168.12.52 <none> <none>
etcd-cluster-qpjdpn9wdl 1/1 Running 0 3m2s 10.244.1.35 192.168.12.51 <none> <none>
etcd-cluster-vg7v7rcdtn 1/1 Running 0 2m22s 10.244.2.28 192.168.12.53 <none> <none>
kpi-exporter-9b9f87bd5-7xfcw 1/1 Running 3 4m8s 10.244.2.16 192.168.12.53 <none> <none>
kpi-exporter-9b9f87bd5-gbzpm 1/1 Running 2 4m8s 10.244.0.17 192.168.12.52 <none> <none>
sadis-server-6c6f649bb4-bfg4m 1/1 Running 1 3m2s 10.244.2.21 192.168.12.53 <none> <none>
seba-base-kubernetes-tosca-loader-gsdwx 0/1 Completed 2 3m2s 10.244.2.22 192.168.12.53 <none> <none>
seba-fabric-6879cd6dc9-dd2xt 1/1 Running 0 3m2s 10.244.2.19 192.168.12.53 <none> <none>
seba-fabric-crossconnect-c684c6df5-wvpjp 1/1 Running 0 3m2s 10.244.0.21 192.168.12.52 <none> <none>
seba-kubernetes-bb4fcd749-z4nr8 1/1 Running 0 3m2s 10.244.1.32 192.168.12.51 <none> <none>
seba-onos-service-86697c97bf-sd2gz 1/1 Running 0 3m2s 10.244.0.22 192.168.12.52 <none> <none>
seba-rcord-6975778bf6-brxvb 1/1 Running 0 3m2s 10.244.2.20 192.168.12.53 <none> <none>
seba-seba-services-tosca-loader-ddnkz 0/1 Completed 4 3m2s 10.244.1.34 192.168.12.51 <none> <none>
seba-volt-f6549c677-qqfcg 1/1 Running 0 3m2s 10.244.1.33 192.168.12.51 <none> <none>
xos-chameleon-645f89cb68-5hvld 1/1 Running 0 4m7s 10.244.1.29 192.168.12.51 <none> <none>
xos-core-868868885d-x9tjx 1/1 Running 0 4m7s 10.244.1.30 192.168.12.51 <none> <none>
xos-db-7445f8dcb7-6867w 1/1 Running 0 4m8s 10.244.0.18 192.168.12.52 <none> <none>
xos-gui-858b98bc9f-pc2b5 1/1 Running 0 4m8s 10.244.1.27 192.168.12.51 <none> <none>
xos-tosca-fdbbc894b-2v264 1/1 Running 0 4m7s 10.244.0.20 192.168.12.52 <none> <none>
xos-ws-6c76444b89-kj8q7 1/1 Running 0 4m8s 10.244.1.28 192.168.12.51 <none> <none>
|
SEBA Blueprint Logs
Logs for the REC cluster install are published here: https://nexus.akraino.org/content/sites/logs/att/job/Install_SEBA_on_OpenEdge1/
Logs for the SEBA software install are published here: https://nexus.akraino.org/content/sites/logs/att/job/Install_SEBA_Charts_on_OpenEdge1/