...

• Deploy Demo App on SONiC

  • Connect to SONiC

    Use serial console connect to SONiC device, serial param is below:

    Baud rate: 115200

    Data bit: 8

    Parity: None

    Stop bits: 1

    Contorol: None

  • Deploy Parsec server

    • add system user parsec (NEED login by admin)

      $ sudo useradd -m parsec

      $ sudo passwd parsec

      $ sudo usermod -s /bin/bash parsec

      $ sudo groupadd parsec-clients

    • create necessary directorys (NEED login by admin)
      

      $ sudo mkdir /var/lib/parsec

      $ sudo chown parsec:parsec /var/lib/parsec

      $ sudo chmod 700 /var/lib/parsec

      $ sudo mkdir /etc/parsec

      $ sudo chown parsec:parsec /etc/parsec

      $ sudo chmod 700 /etc/parsec

      $ sudo mkdir /usr/libexec/parsec

      $ sudo chown parsec:parsec /usr/libexec/parsec

      $ sudo chmod 700 /usr/libexec/parsec

      $ sudo mkdir /home/parsec/run/

      $ sudo chown parsec:parsec-clients /home/parsec/run/

      $ sudo chmod 750 /home/parsec/run/

    • deploy files (NEED login by parsec)

      $ cd ~

      $ pwd

      /home/parsec

      $ cp xxx/parsec/target/release/parsec /usr/libexec/parsec

      $ chmod +x /usr/libexec/parsec/parsec

      $ cp xxx/parsec/config.toml /etc/parsec/config.toml

      Note: need unmark allow_root = true in config.toml.
    • add service for systemctl

      $ sudo vim /etc/systemd/system/parsec.service
      [Unit]
      Description=Parsec Service
      Documentation=https://parallaxsecond.github.io/parsec-book/parsec_service/install_parsec_linux.html

      [Service]
      WorkingDirectory=/home/parsec/
      ExecStart=/usr/libexec/parsec/parsec --config /etc/parsec/config.toml

      [Install]
      WantedBy=multi-user.target

    • start parsec servive

      $ sudo systemctl enable parsec.service

      $ sudo systemctl start parsec.service

  • Deploy Parsec Client

    • import docker image parsec-client-v1.0-docker-aarch64.tar.

      $ sudo docker load < parsec-client-v1.0-docker-aarch64.tar

      $ sudo docker images

      $ sudo docker tag d396f7adeed3 parsec-client:v1.0

    • run the image with --restart=always, then test the client work with parsec server$ sudo docker run --restart=always -d -p8300:8300 -v /home/parsec/run:/run/parsec parsec-client:v1.0
      $ curl -v -d '{"Name": "GoClient"}' 127.0.0.1:8300/client
      ...
      HTTP/1.1 200 OK
      ...
    • create key pairs and export the public key, later the public key will import to Nvidia nano device.

      asd

      $ curl -v -d '{"Name": "GoClient"}' 127.0.0.1:8300/client

      $ curl -v -d '{"Name": "GoClient", "KeyName": "MyEncKey"}' 127.0.0.1:8300/keyenc

      $ curl -v -X GET -d '{"Name": "GoClient", "KeyName": "MyEncKey"}' 127.0.0.1:8300/key

  • Deploy NodeAuthServer

  • Deploy k3s Server

  • Deploy EdgeFaas

...