Introduction

IEC  Akraino Edge Stack supports AR/VR  applications. It could support AR/VR Algorithms that with GPU Modeling (i.e. modeling describes the process of forming the shape of an object) Compositing (e.g. Environmental Mapping, Tone Mapping) Rendering and Illumination Models Visualization of Large Volume 3D Models (e.g. Global Network Operations Center monitoring) Registration (e.g. Stitching data from distributed sources) Segmentation (e.g. Segmentation and detection for security monitoring). This IEC Type 4 AR/VR platform utilizes Tars for remote direct memory access control. In this document, we use Virtual Classroom  as demo for IEC Type4.   Virtual Classroom is an online learning environment that allows teachers and students to communicate and interact with each other in real time. We use WebGL, Three.js and JavaScript to develop Virtual Classroom application.  

License

Apache License - V2

...

Upstream Deployment Guide

Installation for Tars Master

• Install CentOS 7.8
• Install IEC, refer to IEC Type1&2 Installation Guide for R2
• Install Tars, refer to https://tarscloud.github.io/TarsDocs_en/installation/source.html

1. Dependency install

yum install -y glibc-devel gcc gcc-c++ bison flex make cmake psmisc ncurses-devel zlib-devel openssl openssl-devel

...

If you have problems to install mysql with the above step, add the new mysql repository to local server with this yum command and then re-run the previous commands.

sudo yum localinstall https://dev.mysql.com/get/mysql57-community-release-el7-10.noarch.rpm

yum install mariadb-server -y

## Configure mysql
systemctl start mariadb.service
systemctl enable mariadb.service
systemctl status mariadb.service
mysql -u root -p

grep "password" /var/log/mariadb/mariadb.log

ALTER USER 'root'@'localhost' IDENTIFIED BY '${your passwd}';
flush privileges;

2. Install develop environment for Tars
yum install -y npm
npm i -g pm2

wget -qO- https://raw.githubusercontent.com/creationix/nvm/v0.33.11/install.sh | bash
source ~/.bashrc

nvm install v8.11.3
npm install -g pm2 --registry=https://registry.npm.taobao.org

mkdir Tars && cd Tars
git clone https://github.com/TarsCloud/TarsFramework.git --recursive
cd TarsFramework/build
chmod u+x build.sh
./build.sh prepare
./build.sh all

###Recompile if needed.###

./build.sh cleanall
./build.sh all

...

cd /usr/local
mkdir tars
mkdir app
chown ${normal user}:${normal user} ./tars/
chown ${normal user}:${normal user} ./app/

cd
cd Tars/TarsFramework/build/
./build.sh install or make install

The default install path is /usr/local/tars/cpp。
If you want to install on different path:

**modify tarscpp/CMakeLists.txt**
**modify TARS_PATH in tarscpp/servant/makefile/makefile.tars**
**modify DEMO_PATH in tarscpp/servant/script/create_tars_server.sh**

...

 3.0 Firewall setup
firewall-cmd --zone=public --permanent --add-service=http
firewall-cmd --add-port 3000/tcp
firewall-cmd --add-port 3001/tcp
firewall-cmd --add-port 3306/tcp

3.1. Add user

mysql -u root -p
grant all on *.* to 'tarsAdmin'@'%' identified by 'Tars@2019' with grant option;
grant all on *.* to 'tarsAdmin'@'172.22.195.10' identified by 'Tars@2019' with grant option;
grant all on *.* to 'tarsAdmin'@'Node-1' identified by 'Tars@2019' with grant option;
flush privileges;

3.2 setup mysql privileges

mysql -u root -p
>use mysql
>select Host from user where User='root';
if shown as “localhost”，we can update as follwing command：

>update user set host = '%' where user ='root';
>FLUSH PRIVILEGES;
'%'update to the host IP，and then use mysql -u root -p --host '%ip' change back'%'

cd /Tars
git clone https://github.com/TarsCloud/TarsWeb.git
mv TarsWeb web
cp -rf web /usr/local/tars/cpp/deploy/
cd /usr/local/tars/cpp/deploy
chmod a+x linux-install.sh
./linux-install.sh MYSQL_HOST MYSQL_ROOT_PASSWORD INET REBUILD(false[default]/true) SLAVE(false[default]/true)
./linux-install.sh 192.168.1.10 our_PW eno1 false false admin 3306

Installation for Tars Agent(Jenkins Slave)

...

K8STARS is a convenient solution to run TARS services in Kubernetes, and it has the following characteristics:
- Maintain the native development capability of TARS;
- Automatic registration and configuration deletion of name service for TARS;
- Support smooth migration of original TARS services to K8S and other container platforms;
- Non intrusive design, no coupling relationship with operating environment.

How K8STARS works?

1. Three interfaces are added in the tarsregistry, which are used for automatic registration, heartbeat reporting and node offline. For details, please refer to interface definition。

2. A 'tarscli' command-line tool is provided to allocate ports, generate configuration, report heartbeat and node offline.

Deployment

1. Deployment tars basic service

curl https://raw.githubusercontent.com/TarsCloud/K8STARS/master/baseserver/install_all.sh | sh
Deployment service example

1. Deploy sample simpleserver

   cd examples/simple && kubectl apply -f simpleserver.yaml

Example description:

• The image is created by the examples/simple/dockerfile file, and the basic image is created by cmd/tarscli/dockerfile
• start.sh: tarscli genconf in is used to generate the tars service startup configuration
• server_ meta.yaml The file is used to configure the metadata of the service. For field information, please refer to app/genconf/config.go structure ServerConf . Endpoint defaults to tcp -h ${local_ip} -p ${random_port} , supports automatic filling of IP and random ports. -ased on Golang HelloWorld program TestApp.HelloGo See examples/README.md

1. Verify the deployment Login db_tars , then execute select * from t_server_conf\G The node information of simpleserver has been registered automatically.

• Install Virtual Classroom BackEnd

...

Virtual Classroom demo includes two parts: (1) server side and (2) client side. The technologies used to develop these applications includes WebGL, Three.js and JavaScript.

The code could be find at:

git clone https://github.com/OpenVidu/openvidu-vr.git

...

sed -i 's/demos.openvidu.io/${Local_IP_Address}/g' app.js

To execute:

docker run --rm --name openvidu_server -d -p 4443:4443 -e openvidu.secret=MY_SECRET -e openvidu.publicurl=https://${Local_IP_Address}:4443/ openvidu/openvidu-server-kms

...