...
- Does it need define overlay ip ranges special for a hub or use overlay's ip range directly?
- Can 2 Hub setup 2 channels with different masks/interface ids (Need check)?
- How to keep monitoring and restart IPsec tunnel if failed? - Enable IPsec DPD (Dead Peer Detection)
Add-edge-location:
- Trigger: Admin add/update application cluster overlay information in Web UI or Remote Client Call with below information:
- Overlay name
- edge location name
- connected Hub name(s)
- Steps:
- Save application cluster overlay information in DB
Setup edge-hub tunnel with first hub (data plane): e.g. as Initiator - left: %any, leftsourceip:%config, right: HIP, rightsubnet:0.0.0.0/0, overlay CertificateIdGet the assigned OIP, save to DB and broadcast to other hubs (add to exclude list of its responder - Need to check how to do it)- Setup edge-hub tunnel with all hubs (data plane): e.g. as host-host tunnel
- Edge - left: EOIP, right: HIP, overlay's CertificateId
- Hub - left: HIP, right: EOIP, overlay's CertificateId
...