| Table of Contents | ||
|---|---|---|
|
...
Hostname | CPU Model | Memory | BMC Firmware | Storage | 1GbE: NIC#, VLAN, (Connected extreme 480 switch) | 10GbE: NIC# VLAN, Network (Connected with IZ1 switch) | 40GbE: NIC# |
|---|---|---|---|---|---|---|---|
Jump | Intel 2xE5-2699 | 64GB | 1.46.9995 | 3TB (Sata) | IF0: VLAN 110 (DMZ) | IF2: VLAN 112 (Private) | |
node1 | Intel 2xE5-2699 | 64GB | 1.46.9995 | 3TB (Sata) | IF0: VLAN 110 (DMZ) | IF2: VLAN 112 (Private) | |
node2 | Intel 2xE5-2699 | 64GB | 1.46.9995 | 3TB (Sata) | IF0: VLAN 110 (DMZ) | IF2: VLAN 112 (Private) | IF4: SRIOV |
Virtual deployment
Hostname | CPU Model | Memory | Storage | 1GbE: NIC#, VLAN, (Connected extreme 480 switch) | 10GbE: NIC# VLAN, Network (Connected with IZ1 switch) |
|---|---|---|---|---|---|
node1 | Intel 2xE5-2699 | 64GB | 3TB (Sata) | IF0: VLAN 110 (DMZ) | IF2: VLAN 112 (Private) |
Test Framework
All components are tested with end-to-end testing
...
CMK
Le Yao (Deactivated)
Optane PM
- The Optane PM plugin is Kubernetes CSI plugin and driver with storage volume provisioning for Kubernetes applications.
- Check whether the Optane
...
- PM hardware: NVDIMM is existed, if not skip the validation.
- Configure the Optane PM plugin in KUD, and create StorageClass and PersistentVolumeClaim which used by Kubernetes application, check whether the PVC is bound, if yes, the Optane PM volume created and bound to PVC and used by application, validation passed.
SDEWAN
- Use Kud to setup 3 clusters (traffic hub, edge1, edge2)
- Create SDEWAN CNF instance and dummy pod in edge1, SDEWAN CNF instance and httpbin pod in edge2
- Configure traffic hub as responder to provide IP addresses to any authenticated party requesting for IP addresses.
- Configure edge1 and edge2 IPSec configuration to get the IP addresses.
- Establish edge1 tunnel to traffic hub, edge2 tunnel to hub, and hub policy for traffic between edge1 and edge2
- Establish SNAT rule in edge1 and DNAT rule in edge2 to enable tcp connection from edge1 to edge2's httpbin service
- Verify curl command is successful from edge1 dummy pod to edge2's httpbin service
...