Page Comparison

...

• Request Parameters: same with PUT's response request

• Request Example: same with PUT's response s  example

  
  

Response

• Normal response codes: 201
• Error response codes: 400, 401

...

• Request Parameters: same with PUT's response request

• Request Example: same with PUT's response example

  
  

Response

• Normal response codes: 201
• Error response codes: 400, 401

...

• Request Parameters: same with PUT's response request

• Request Example: same with PUT's response example

  
  

Response

• Normal response codes: 201
• Error response codes: 400, 401

...

• Request Parameters:

  Name	In	Type	Description
  zone-name	path	string	zone name
  {other params}network	body	same with GET response

  Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/zones/wan

  {

         "network":"wan"，

         "input": "REJECT"，

         "output": "ACCEPT"，

        "forward": "REJECT"，

         "masq": "1"，

         "mtu_fix": "1"

  }

Response

• Normal response codes: 204
• Error response codes: 400, 401, 404

GET /cgi-bin/luci/sdewan/firewall/v1/zones

Lists all defined zones

Request: N/A

Response

...

Response Parameters

...

{
    "zones": [

        {

            "name":"wan"，

            "network":"wan"，

            "input": "REJECT"，

            "output": "ACCEPT"，

            "forward": "REJECT"，

            "masq": "1"，

            "mtu_fix": "1"

         }

    ]

}

...

• array	List of interfaces attached to this zone
  masq	body	boolean	Specifies whether outgoing zone traffic should be masqueraded. "0" or "1"
  masq_src	body	string	Limit masquerading to the given source subnets.
  masq_dest	body	string	Limit masquerading to the given destination subnets
  masq_allow_invalid	body	boolean	whether add DROP INVALID rules
  mtu_fix	body	boolean	Enable MSS clamping for outgoing zone traffic
  input	body	string	Default policy (ACCEPT, REJECT, DROP) for incoming zone traffic.
  forward	body	string	Default policy (ACCEPT, REJECT, DROP) for forwarded zone traffic.
  output	body	string	Default policy (ACCEPT, REJECT, DROP) for output zone traffic.
  family	body	string	The protocol family (ipv4, ipv6 or any) these iptables rules are for.
  subnet	body	string	List of IP subnets attached to this zone
  extra_src	body	string	Extra arguments passed directly to iptables for source classification rules.
  etra_dest	body	string	Extra arguments passed directly to iptables for destination classification rules.

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/

...

• mwan3/v1/zones/wan

  {

...

Get a zone

Request: N/A

• Request Parameters

  NameInTypeDescriptionzone-namepathstringzone name

  "network":"wan"，        "input": "REJECT"，        "output": "ACCEPT"，       "forward": "REJECT"，        "masq": "1"，        "mtu_fix": "1" }

  
  

Response

• Normal response codes: 200204
• Error response codecodes: 404

Response Parameters

NameInTypeDescriptionnamebodystring(Required) zone namenetwork
• 400, 401, 404

GET /cgi-bin/luci/sdewan/firewall/v1/zones

Lists all defined zones

Request: N/A

Response

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  zones	body	array

  List of interfaces attached to this zonemasqbodybooleanSpecifies whether outgoing zone traffic should be masqueraded. "0" or "1"masq_srcbodystringLimit masquerading to the given source subnets.masq_destbodystringLimit masquerading to the given destination subnetsmasq_allow_invalidbodybooleanwhether add DROP INVALID rules mtu_fix bodybooleanEnable MSS clamping for outgoing zone traffic input body string Default policy (ACCEPT, REJECT, DROP) for incoming zone traffic. forward body string Default policy (ACCEPT, REJECT, DROP) for forwarded zone traffic. outputbody string Default policy (ACCEPT, REJECT, DROP) for output zone traffic. family body string The protocol family (ipv4, ipv6 or any) these iptables rules are for. subnet body string List of IP subnets attached to this zone extra_src body string Extra arguments passed directly to iptables for source classification rules.   etra_dest body string Extra arguments passed directly to iptables for destination classification rules.   
  Response Example

  {

        "name":"wan",

         "network":"wan"，

         "input": "REJECT"，

         "output": "ACCEPT"，

        "forward": "REJECT"，

         "masq": "1"，

         "mtu_fix": "1"，

  }

DELETE /cgi-bin/luci/sdewan/firewall/v1/zones/{zone-name}

delete a zone

Request:

Request Parameters

...

Response

• Normal response codes: 200
• Error response codes: 401, 404

Redirect

POST /cgi-bin/luci/sdewan/firewall/v1/redirects

create a new redirect

Request:

...

Request Parameters: same with PUT's response request

...

Response

• Normal response codes: 201
• Error response codes: 400, 401

PUT /cgi-bin/luci/sdewan/firewall/v1/redirects/{redirect-name}

update a redirect

Request:

• Request Parameters:

  NameInTypeDescriptionredirect-namepathstringredirect name{other params}bodysame with GET responseRequest ExamplePUT

  a list of defined zones

  
  

• Response Example

  
  

  {     "zones": [         {             "name":"wan"，             "network":"wan"，             "input": "REJECT"，             "output": "ACCEPT"，             "forward": "REJECT"，             "masq": "1"，             "mtu_fix": "1"          }     ] }

  
  

GET /cgi-bin/luci/sdewan/firewall/v1/zones/{zone-name}

Get a zone

Request: N/A

• Request Parameters

  Name	In	Type	Description
  zone-name	path	string	zone name

  
  

Response

• Normal response codes: 200
• Error response code: 404

• Response Parameters

  Name	In	Type	Description
  name	body	string	(Required) zone name
  network	body	array	List of interfaces attached to this zone
  masq	body	boolean	Specifies whether outgoing zone traffic should be masqueraded. "0" or "1"
  masq_src	body	string	Limit masquerading to the given source subnets.
  masq_dest	body	string	Limit masquerading to the given destination subnets
  masq_allow_invalid	body	boolean	whether add DROP INVALID rules
  mtu_fix	body	boolean	Enable MSS clamping for outgoing zone traffic
  input	body	string	Default policy (ACCEPT, REJECT, DROP) for incoming zone traffic.
  forward	body	string	Default policy (ACCEPT, REJECT, DROP) for forwarded zone traffic.
  output	body	string	Default policy (ACCEPT, REJECT, DROP) for output zone traffic.
  family	body	string	The protocol family (ipv4, ipv6 or any) these iptables rules are for.
  subnet	body	string	List of IP subnets attached to this zone
  extra_src	body	string	Extra arguments passed directly to iptables for source classification rules.
  etra_dest	body	string	Extra arguments passed directly to iptables for destination classification rules.

  
  

• Response Example

  
  

  {       "name":"wan",        "network":"wan"，        "input": "REJECT"，        "output": "ACCEPT"，       "forward": "REJECT"，        "masq": "1"，        "mtu_fix": "1"， }

  
  

DELETE /cgi-bin/luci/sdewan/

...

firewall/v1/

...

{

    "src":"wan",
    "src_dport":"19900",
    "dest":"lan",
    "dest_ip":"192.168.1.1",
    "dest_port":"22",
    "proto":"tcp",
    "target":"DNAT"

}

zones/{zone-name}

delete a zone

Request:

• Request Parameters

  Name	In	Type	Description
  zone-name	path	string	zone name

  
  

Response

• Normal response codes: 200
• Error response codes: 401, 404

Redirect

POST /cgi-bin/luci/sdewan/firewall/v1/redirects

create a new redirect

Request:

• Request Parameters: same with PUT's request

• Request Example: same with PUT's example

  
  

Response

• Normal response codes: 204201
• Error response codes: 400, 401, 404

GET PUT /cgi-bin/luci/sdewan/firewall/v1/redirects

Lists all defined redirects

Request: N/A

Response

...

/{redirect-name}

update a redirect

Request:

• Request Parameters:

  Name	In	Type	Description

  redirects

  redirect-name

  body

  path

  arraya list of defined redirects
  Response Example

  {
      "redirects": [

          {

              "name":"dnat_lan",
              "src":"wan",
              "src_dport":"19900",
              "dest":"lan",
              "dest_ip":"192.168.1.1",
              "dest_port":"22",
              "proto":"tcp",
              "target":"DNAT"

        }

      ]

  }

GET /cgi-bin/luci/sdewan/firewall/v1/redirects/{redirect-name}

Get a redirect

Request: N/A

Request Parameters

...

Response

• Normal response codes: 200
• Error response code: 404

• Response Parameters

  NameInTypeDescriptionnamebodystring(Required) forwarding namesrcbodystring(Required for DNAT) traffic source zonesrc_ipbodystringMatch incoming traffic from the specified source ip address.src_dipbodystring(Required for SNAT) For DNAT, match incoming traffic directed at the given destination ip address. For SNAT rewrite the source address to the given address.src_macbody string Match incoming traffic from the specified mac address. src_port body port or range Match incoming traffic originating from the given source port or port range on the client host.src_dport body port or range For DNAT, match incoming traffic directed at the given destination port or port range on this host. For SNAT rewrite the source ports to the given value.  proto body string Match incoming traffic using the given protocol. Can be one of tcp, udp, tcpudp, udplite, icmp, esp, ah, sctp, or all dest body string Specifies the traffic destination zone. Must refer to one of the defined zone names. dest_ip body string For DNAT, redirect matches incoming traffic to the specified internal host. For SNAT, it matches traffic directed at the given address.  dest_port bodyport or range For DNAT, redirect matched incoming traffic to the given port on the internal host. For SNAT, match traffic directed at the given ports. mark body string match traffic against the given firewall mark target body string (Required) NAT target: SNAT, DNATfamily body string Protocol family (ipv4, ipv6 or any) to generate iptables rules for Response Example

  {

     

  string	redirect name
  src	body	string	(Required for DNAT) traffic source zone
  src_ip	body	string	Match incoming traffic from the specified source ip address.
  src_dip	body	string	(Required for SNAT) For DNAT, match incoming traffic directed at the given destination ip address. For SNAT rewrite the source address to the given address.
  src_mac	body	string	Match incoming traffic from the specified mac address.
  src_port	body	port or range	Match incoming traffic originating from the given source port or port range on the client host.
  src_dport	body	port or range	For DNAT, match incoming traffic directed at the given destination port or port range on this host. For SNAT rewrite the source ports to the given value.
  proto	body	string	Match incoming traffic using the given protocol. Can be one of tcp, udp, tcpudp, udplite, icmp, esp, ah, sctp, or all
  dest	body	string	Specifies the traffic destination zone. Must refer to one of the defined zone names.
  dest_ip	body	string	For DNAT, redirect matches incoming traffic to the specified internal host. For SNAT, it matches traffic directed at the given address.
  dest_port	body	port or range	For DNAT, redirect matched incoming traffic to the given port on the internal host. For SNAT, match traffic directed at the given ports.
  mark	body	string	match traffic against the given firewall mark
  target	body	string	(Required) NAT target: SNAT, DNAT
  family	body	string	Protocol family (ipv4, ipv6 or any) to generate iptables rules for

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/redirects/dnat_lan

  {     "src":"wan",     "src_dport":"19900",     "dest":"lan",     "dest_ip":"192.168.1.1",     "dest_port":"22",     "proto":"tcp",     "target":"DNAT" }

  
  

Response

• Normal response codes: 204
• Error response codes: 400, 401, 404

GET /cgi-bin/luci/sdewan/firewall/v1/redirects

Lists all defined redirects

Request: N/A

Response

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  redirects	body	array	a list of defined redirects

  
  

• Response Example

  
  

...

Response

• Normal response codes: 201
• Error response codes: 400, 401

PUT /cgi-bin/luci/sdewan/firewall/v1/rules/{rule-name}

update a rule

Request:

• Request Parameters:

  NameInTypeDescriptionrule-namepathstringrule name{other params}bodysame with GET response

  {     "redirects": [         {             "name":"dnat_lan",                 "src":"wan",                 "src_dport":"19900",                 "dest":"lan",                 "dest_ip":"192.168.1.1",                 "dest_port":"22",     "proto":"tcp",     "target":"DNAT" }

DELETE /cgi-bin/luci/sdewan/firewall/v1/redirects/{redirect-name}

delete a redirect rule

Request:

Request Parameters

...

Response

• Normal response codes: 200
• Error response codes: 401, 404

Rule

POST /cgi-bin/luci/sdewan/firewall/v1/rules

create a new rule

Request:

...

Request Parameters: same with PUT's response request

• "proto":"tcp",             "target":"DNAT"       }     ] }

  
  

GET /cgi-bin/luci/sdewan/firewall/v1/redirects/{redirect-name}

Get a redirect

Request: N/A

• Request Parameters

  Name	In	Type	Description
  redirect-name	path	string	redirect name

  
  

Response

• Normal response codes: 200
• Error response code: 404

• Response Parameters

  Name	In	Type	Description
  name	body	string	(Required) forwarding name
  src	body	string	(Required for DNAT) traffic source zone
  src_ip	body	string	Match incoming traffic from the specified source ip address.
  src_dip	body	string	(Required for SNAT) For DNAT, match incoming traffic directed at the given destination ip address. For SNAT rewrite the source address to the given address.
  src_mac	body	string	Match incoming traffic from the specified mac address.
  src_port	body	port or range	Match incoming traffic originating from the given source port or port range on the client host.
  src_dport	body	port or range	For DNAT, match incoming traffic directed at the given destination port or port range on this host. For SNAT rewrite the source ports to the given value.
  proto	body	string	Match incoming traffic using the given protocol. Can be one of tcp, udp, tcpudp, udplite, icmp, esp, ah, sctp, or all
  dest	body	string	Specifies the traffic destination zone. Must refer to one of the defined zone names.
  dest_ip	body	string	For DNAT, redirect matches incoming traffic to the specified internal host. For SNAT, it matches traffic directed at the given address.
  dest_port	body	port or range	For DNAT, redirect matched incoming traffic to the given port on the internal host. For SNAT, match traffic directed at the given ports.
  mark	body	string	match traffic against the given firewall mark
  target	body	string	(Required) NAT target: SNAT, DNAT
  family	body	string	Protocol family (ipv4, ipv6 or any) to generate iptables rules for

  
  

• Response Example

  
  

  {     "name":"dnat_lan",     "src":"wan",     "src_dport":"19900",     "dest":"lan",     "dest_ip":"192.168.1.1",     "dest_port":"22",     "proto":"tcp",     "target":"DNAT" }

  
  

DELETE /cgi-bin/luci/sdewan/firewall/v1/redirects/{redirect-name}

delete a redirect rule

Request:

• Request Parameters

  Name	In	Type	Description
  redirect-name	path	string	redirect name

  
  

Response

• Normal response codes: 200
• Error response codes: 401, 404

Rule

POST /cgi-bin/luci/sdewan/firewall/v1/rules

create a new rule

Request:

• Request Parameters: same with PUT's request

• Request Example: same with PUT's example

  
  

Response

• Normal response codes: 201
• Error response codes: 400, 401

PUT /cgi-bin/luci/sdewan/firewall/v1/rules/{rule-name}

update a rule

Request:

• Request Parameters:

  Name	In	Type	Description
  rule-name	path	string	rule name
  src	body	string	(Required) traffic source zone
  src_ip	body	string	Match incoming traffic from the specified source ip address
  src_mac	body	string	Match incoming traffic from the specified mac address
  src_port	body	port or range	Match incoming traffic from the specified source port or port range
  proto	body	string	Match incoming traffic using the given protocol. Can be one of tcp, udp, tcpudp, udplite, icmp, esp, ah, sctp, or all
  icmp_type	body	string	For protocol icmp select specific icmp types to match.
  dest	body	string	traffic destination zone. Must refer to one of the defined zone names, or * for any zone
  dest_ip	body	string	Match incoming traffic directed to the specified destination ip address
  dest_port	body	port or range	Match incoming traffic directed at the given destination port or port range
  mark	body	string	If specified, match traffic against the given firewall mark
  target	body	string	(Required) Firewall action (ACCEPT, REJECT, DROP, MARK, NOTRACK) for matched traffic
  set_mark	body	string	Zeroes out the bits given by mask and ORs value into the packet mark.
  set_xmark	body	string	Zeroes out the bits given by mask and XORs value into the packet mark
  family	body	string	Protocol family (ipv4, ipv6 or any) to generate iptables rules for
  extra	body	string	Extra arguments to pass to iptables. Useful mainly to specify additional match options, such as -m policy --dir in for IPsec.

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/rules/reject_lan_80

  {        "src":"lan"，        "src_ip": "192.168.1.2",        "src_port": "80",        "proto":"tcp",        "target":"REJECT" }

  
  

...

• Request Parameters: same with PUT's response request

• Request Example: same with PUT's response example

  
  

Response

• Normal response codes: 201
• Error response codes: 400, 401

...

• Request Parameters:

  Name	In	Type	Description
  forwarding-name	path	string	forwarding name	{other params}	body	same with GET response
  src	body	string	(Required) traffic source zone
  dest	body	string	(Required) traffic destination zone
  family	body	string	Protocol family (ipv4, ipv6 or any) to generate iptables rules for.

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/forwardings/lan_wan

  {        "src":"lan"，        "dest": "wan" }

  
  

...