Page Comparison

...

• Request Parameters: same with GETPUT's response request

• Request Example: same with GETPUT's response example

  
  

Response

...

• Request Parameters

  Name	In	Type	Description
  rule-name	path	string	rule name
  policy	body	string	policy used for the rule
  src_ip	body	string	(optional) source ip address
  src_port	body	string	(optional) source port or port range
  dest_ip	body	string	(optional) destination ip address
  dest_port	body	string	(optional) destination port or port range
  proto	body	string	(optional) protocol for the rule. Valid values: "tcp", "udp", "icmp", "all"
  family	body	string	(optional) address family. Valid values: "ipv4", "ipv6", "all"
  sticky	body	string	(optional) default: 0, allow traffic from the same source ip address within the timeout limit to use same wan interface as prior session
  timeout	body	int	(optional) default: 600,  Stickiness timeout value in seconds

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/rules/default_rule

  {     "dest_ip": "0.0.0.0/0"，      "policy": "balanced" }

  
  

...

• Request Parameters: same with GETPUT's response request

• Request Example: same with GETPUT's response example

  
  

Response

...

• Request Parameters:

  Name	In	Type	Description
  zone-name	path	string	zone name
  {other params}	body		same with GET response

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/zones/wan

  {        "network":"wan"，        "input": "REJECT"，        "output": "ACCEPT"，       "forward": "REJECT"，        "masq": "1"，        "mtu_fix": "1" }

  
  

...

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  redirects	body	array	a list of defined redirects

  
  

• Response Example

  
  

  {     "redirects": [         {             "name":"DNAT-LANdnat_lan",             "src":"wan",             "src_dport":"19900",             "dest":"lan",             "dest_ip":"192.168.1.1",             "dest_port":"22",             "proto":"tcp",             "target":"DNAT"       }     ] }

  
  

...

• Normal response codes: 200
• Error response code: 404

• Response Parameters

  Name	In	Type	Description
  name	body	string	(Required) forwarding name
  src	body	string	(Required for DNAT) traffic source zone
  src_ip	body	string	Match incoming traffic from the specified source ip address.
  src_dip	body	string	(Required for SNAT) For DNAT, match incoming traffic directed at the given destination ip address. For SNAT rewrite the source address to the given address.
  src_mac	body	string	Match incoming traffic from the specified mac address.
  src_port	body	port or range	Match incoming traffic originating from the given source port or port range on the client host.
  src_dport	body	port or range	For DNAT, match incoming traffic directed at the given destination port or port range on this host. For SNAT rewrite the source ports to the given value.
  proto	body	string	Match incoming traffic using the given protocol. Can be one of tcp, udp, tcpudp, udplite, icmp, esp, ah, sctp, or all
  dest	body	string	Specifies the traffic destination zone. Must refer to one of the defined zone names.
  dest_ip	body	string	For DNAT, redirect matches incoming traffic to the specified internal host. For SNAT, it matches traffic directed at the given address.
  dest_port	body	port or range	For DNAT, redirect matched incoming traffic to the given port on the internal host. For SNAT, match traffic directed at the given ports.
  mark	body	string	match traffic against the given firewall mark
  target	body	string	(Required) NAT target: SNAT, DNAT
  family	body	string	Protocol family (ipv4, ipv6 or any) to generate iptables rules for

  
  

• Response Example

  
  

  {     "name":"DNAT-LANdnat_lan",     "src":"wan",     "src_dport":"19900",     "dest":"lan",     "dest_ip":"192.168.1.1",     "dest_port":"22",     "proto":"tcp",     "target":"DNAT" }

  
  

...

• Request Parameters: same with GETPUT's response request

• Request Example: same with GETPUT's response example

  
  

Response

...

• Request Parameters:

  Name	In	Type	Description
  redirect-name	path	string	redirect name
  {other params}	body		same with GET response

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/redirects/dnat_lan

  {     "src":"wan",     "src_dport":"19900",     "dest":"lan",     "dest_ip":"192.168.1.1",     "dest_port":"22",     "proto":"tcp",     "target":"DNAT" }

  
  

...

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  rules	body	array	a list of defined rules

  
  

• Response Example

  
  

  {     "rules": [        {            "name":"REJECTreject_LANlan_80"            "src":"lan"，            "src_ip": "192.168.1.2",            "src_port": "80",            "proto":"tcp",            "target":"REJECT"       }     ] }

  
  

...

• Normal response codes: 200
• Error response code: 404

• Response Parameters

  Name	In	Type	Description
  name	body	string	(Required) rule name
  src	body	string	(Required) traffic source zone
  src_ip	body	string	Match incoming traffic from the specified source ip address
  src_mac	body	string	Match incoming traffic from the specified mac address
  src_port	body	port or range	Match incoming traffic from the specified source port or port range
  proto	body	string	Match incoming traffic using the given protocol. Can be one of tcp, udp, tcpudp, udplite, icmp, esp, ah, sctp, or all
  icmp_type	body	string	For protocol icmp select specific icmp types to match.
  dest	body	string	traffic destination zone. Must refer to one of the defined zone names, or * for any zone
  dest_ip	body	string	Match incoming traffic directed to the specified destination ip address
  dest_port	body	port or range	Match incoming traffic directed at the given destination port or port range
  mark	body	string	If specified, match traffic against the given firewall mark
  target	body	string	(Required) Firewall action (ACCEPT, REJECT, DROP, MARK, NOTRACK) for matched traffic
  set_mark	body	string	Zeroes out the bits given by mask and ORs value into the packet mark.
  set_xmark	body	string	Zeroes out the bits given by mask and XORs value into the packet mark
  family	body	string	Protocol family (ipv4, ipv6 or any) to generate iptables rules for
  extra	body	string	Extra arguments to pass to iptables. Useful mainly to specify additional match options, such as -m policy --dir in for IPsec.

  
  

• Response Example

  
  

  {        "name":"REJECTreject_LANlan_80"        "src":"lan"，        "src_ip": "192.168.1.2",        "src_port": "80",        "proto":"tcp",        "target":"REJECT" }

  
  

...

• Request Parameters: same with GETPUT's response request

• Request Example: same with GETPUT's response example

  
  

Response

...

• Request Parameters:

  Name	In	Type	Description
  rule-name	path	string	rule name
  {other params}	body		same with GET response

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/rules/reject_lan_80

  {        "src":"lan"，        "src_ip": "192.168.1.2",        "src_port": "80",        "proto":"tcp",        "target":"REJECT" }

  
  

...

• Normal response codes: 200

• Response Parameters

  Name	In	Type	Description
  forwardings	body	array	a list of defined forwardings

  
  

• Response Example

  
  

  {     "forwardings": [         {           "name":"lan-_wan",           "src":"lan"，           "dest": "wan"       }     ] }

  
  

...

• Normal response codes: 200
• Error response code: 404

• Response Parameters

  Name	In	Type	Description
  name	body	string	(Required) forwarding name
  src	body	string	(Required) traffic source zone
  dest	body	string	(Required) traffic destination zone
  family	body	string	Protocol family (ipv4, ipv6 or any) to generate iptables rules for.

  
  

• Response Example

  
  

  {       "name":"lan-_wan",       "src":"lan"，       "dest": "wan" }

  
  

...

• Request Parameters: same with GETPUT's response request

• Request Example: same with GETPUT's response example

  
  

Response

...

• Request Parameters:

  Name	In	Type	Description
  forwarding-name	path	string	forwarding name
  {other params}	body		same with GET response

  
  

• Request Example

  PUT /cgi-bin/luci/sdewan/mwan3/v1/forwardings/lan_wan

  {        "src":"lan"，        "dest": "wan" }

  
  

...