| Table of Contents |
|---|
...
| Microservices of Openness Infrastructure mode | Description | Deployment method | Deployment of the component | Propose to integrate |
|---|---|---|---|---|
| eaa | application/service registration, authentication etc | deployment | edge node | yes |
| edgedns | for client to access microservices in edge node | daemonset (propose to change to deployment) | edge node | yes |
| interfaceservice | similar with providernet implemented in ovn4nfv-k8s-plugin | daemonset | edge node | no, will use ovn4nfv-k8s-plugin's provider network |
| cnca | Core Network Configuration: Configure the access network (e.g., LTE/CUPS, 5G) control plane | deployment | controller | no |
| syslog | log service for openness | daemonset | controller & edge node | no |
| multus | enabling attaching multiple network interfaces to pods | daemonset | controller & edge node | no, will be covered by ONAP4K8S |
| nfd | node feature discovery | daemonset | controller & edge node | no, will be covered by ONAP4K8S |
| sriov | sriov network device plugin & sriov cni | daemonset | controller & edge node | no, will be covered by ONAP4K8S |
| topology manager | kubernetes topology manager | Kubelet component | controller & edge nodeno | , will be covered by ONAP4K8SNeed to integrate in KUD |
| CMK | CPU Manager | part of kubelet | controller & edge nodeno | , will be covered by ONAP4K8SNeed to integrate in KUD |
| bios | Used for change BIOS and Firmware Configuration using Intel® System Configuration Utility which is a command-line utility that can be used to save and restore BIOS and firmware settings to a file or to set and display individual settingsfirmware configuration: CPU configuration, Cache and Memory configuration, PCIe Configuration, Power and Performance configuration, etc | privileged Pod | controller & edge node | Required for ICN? |
| fpga | Open Programmable Acceleration Engine (OPAE) package consisting of a kernel driver and user space FPGA utils package that enables programming of the FPGA is used. sriov is used to configure the FPGA resources such as Virtual Functions and queues | pod | controller & edge node | Required for ICN? |
Openness dns config agent design
...