...
The Target RC has multiple physical and VLAN interfaces. The Build Server uses different interfaces during the different stages of its creation of a RC on the Target Server. A very detailed description of the entire networking setup can be found in the Network Architecture section of this release documentation <INSERT LINK>. In addition the networking configuration with example vlaues as used in the validation labs is contained in the Validation Labs section of this release documentation Ericsson Unicycle OVS-DPDK Validation HW, Networking and IP plan.
The Build Server must have IP connectivity to the Target Server's dedicated BMC port using ports 80 (http) <is 80 actually used?> and 443 (https) in order to issue Redfish commands to configure the Target Server's BIOS settings. The Target Server's BMC IP address is denoted as <SRV_OOB_IP> in this guide. The Target Server's BMC must be manually preconfigured with the <SRV_OOB_IP> address.
...
| Code Block | ||
|---|---|---|
| ||
root@build-server# /opt/akraino/region/install_akraino_portal.sh |
This will also take many 10 to 20 minutes. <INSERT BALL PARK> .
A successful installation will end with the following message
...